Definition for hole

Types

	`EA3DFRMEnumValue_DepthType`
	`EA3DFRMEnumValue_Hole`
	`EA3DFRMEnumValue_DepthLevel`
	`EA3DFRMDefinitionHoleType`

Fields

	`kA3DFRMEnumValue_DepthType_None`
	`kA3DFRMEnumValue_DepthType_Blind`
	`kA3DFRMEnumValue_DepthType_ThruAll`
	`kA3DFRMEnumValue_DepthType_Reference`
	`kA3DFRMEnumValue_DepthType_Next`
	`kA3DFRMEnumValue_DepthType_Until`
	`kA3DFRMEnumValue_DepthType_AsReference`
	`kA3DFRMEnumValue_DepthType_ThreadPitchCount`
	`kA3DFRMEnumValue_HoleShape_None`
	`kA3DFRMEnumValue_HoleShape_Simple`
	`kA3DFRMEnumValue_HoleShape_Bore`
	`kA3DFRMEnumValue_HoleShape_Sunk`
	`kA3DFRMEnumValue_HoleShape_Tapered`
	`kA3DFRMEnumValue_HoleShape_Sketch`
	`kA3DFRMEnumValue_HoleShape_General`
	`kA3DFRMEnumValue_HoleShape_Standard`
	`kA3DFRMEnumValue_HoleShape_StandardClearance`
	`kA3DFRMEnumValue_HoleShape_ByElement`
	`kA3DFRMEnumValue_DepthLevel_None`
	`kA3DFRMEnumValue_DepthLevel_Start`
	`kA3DFRMEnumValue_DepthLevel_Neck`
	`kA3DFRMEnumValue_DepthLevel_VStart`
	`kA3DFRMEnumValue_DepthLevel_End`
	`kA3DFRMEnumValue_DepthLevel_Profile`
	`kA3DFRMDefinitionHoleType_None`
	`kA3DFRMDefinitionHoleType_RectangularDefinition`
	`kA3DFRMDefinitionHoleType_ChamferDefinition`
	`kA3DFRMDefinitionHoleType_CboreDefinition`
	`kA3DFRMDefinitionHoleType_SunkDefinition`
	`kA3DFRMDefinitionHoleType_TaperedDefinition`
	`kA3DFRMDefinitionHoleType_StandardDefinition`
	`kA3DFRMDefinitionHoleType_ElementDefinition`

Detailed Description

group a3d_feature_hole_module

Version: 10.2

Type Documentation

enum EA3DFRMEnumValue_DepthType

all possible type of depth.

This can be used to specify Depth of Features Extrude, Hole, Thread, etc.

Example of usage in case of Simple Hole Feature: ../_images/frm_depth_types.png

Version: 10.2

Values:

enumerator kA3DFRMEnumValue_DepthType_None: Invalid Depth Type.

enumerator kA3DFRMEnumValue_DepthType_Blind: Depth is define by a Depth Value.

enumerator kA3DFRMEnumValue_DepthType_ThruAll: Depth is define thought all geometry.

enumerator kA3DFRMEnumValue_DepthType_Reference: Depth is define up to the specified reference.

enumerator kA3DFRMEnumValue_DepthType_Next: Depth is define up to the next surface encountered.

enumerator kA3DFRMEnumValue_DepthType_Until: Depth is define thought the specified reference, up to the last encounter.

enumerator kA3DFRMEnumValue_DepthType_AsReference: In case of feature likes Thread, DepthType_AsReference specified that the Depth is the same as the reference feature (example: on a Hole Feature create a full Thread Feature, that is as deep as the Hole Depth).

enumerator kA3DFRMEnumValue_DepthType_ThreadPitchCount: Depth is define by the number of revolution (specific of SLW thread).

enum EA3DFRMEnumValue_Hole

Enumerate the possible types of hole shape types

This allow to specify the type of hole, and so the Definition you should expect to have under the

kA3DFRMFeatureDefinitionType_Hole.

../_images/frm_holeshape_types.jpg ../_images/frm_holeshape_type_ByElement.jpg

Version: 10.2

Values:

enumerator kA3DFRMEnumValue_HoleShape_None: Invalid Hole Shape Type.

enumerator kA3DFRMEnumValue_HoleShape_Simple

Simple Hole: regular hole.

Expect to NOT have Bore, Sunk or Tapered Definition

enumerator kA3DFRMEnumValue_HoleShape_Bore: Counter Bore Hole: Expect to have a BoreDefinition.

enumerator kA3DFRMEnumValue_HoleShape_Sunk: Counter Sunk Hole: Expect to have a SunkDefinition.

enumerator kA3DFRMEnumValue_HoleShape_Tapered: Counter Tapered Hole: Expect to have a TaperedDefinition.

enumerator kA3DFRMEnumValue_HoleShape_Sketch: Hole shape define with a Sketch: Not Implemented Yet.

enumerator kA3DFRMEnumValue_HoleShape_General: Complex Hole Shape, that combine other shapes: Expect to have a combination of Bore, Sunk and Tapered Definitions.

enumerator kA3DFRMEnumValue_HoleShape_Standard: Standard hole shape.

enumerator kA3DFRMEnumValue_HoleShape_StandardClearance: Standard clearance hole shape.

enumerator kA3DFRMEnumValue_HoleShape_ByElement

Hole that is a sequence of common elements, such as Counter Bore or Tapered.

Each element has a shape, a depth, and might have a thread.

enum EA3DFRMEnumValue_DepthLevel

Enumerate the possible types of depth level types

Enumerate the possible semantic depth position in a hole.

This can be used to specify:

Hole Chamfer position: possible values = Start / Neck / End
For a Tapered, where tapered diameter is applied: possible values = Start / VStart (define rather the min or max tapered diameter)

../_images/frm_depthlevel_types.jpg

Version: 10.2

Values:

enumerator kA3DFRMEnumValue_DepthLevel_None: Invalid Depth Level Type.

enumerator kA3DFRMEnumValue_DepthLevel_Start: Start of the hole.

enumerator kA3DFRMEnumValue_DepthLevel_Neck: In case of a Counter Bore, The neck correspond to the Bore part depth, just before the regular hole part.

enumerator kA3DFRMEnumValue_DepthLevel_VStart: In case of tipped Hole, VStart correspond to the hole bottom without considering the tip part.

enumerator kA3DFRMEnumValue_DepthLevel_End: End of the hole.

enumerator kA3DFRMEnumValue_DepthLevel_Profile

Position of the profile.

This could be different than hole Start for example in case of Hole with DepthFrom value.

enum EA3DFRMDefinitionHoleType

Enumerate the possible types of definition hole types

Enumerate the specific types of Definition Feature that can be found under a

kA3DFRMFeatureDefinitionType_Hole.

Version: 10.2

Values:

enumerator kA3DFRMDefinitionHoleType_None: Invalid Hole Type.

enumerator kA3DFRMDefinitionHoleType_RectangularDefinition

Type of Definition containing regular hole information common to all Hole Shape types except HoleShape_Sketch:

Parameter Data:
- DoubleData Diameter: hole diameter
- Value Angle: tip angle (optional)

enumerator kA3DFRMDefinitionHoleType_ChamferDefinition

Type of Definition containing information specific to Hole Chamfer:

Parameter Specification:
- EnumData DepthLevel: depth level where chamfer is applied. see EA3DFRMEnumValue_DepthLevel
Parameter Data:
- Value Angle: chamfer angle
- Value Offset: chamfer offset

enumerator kA3DFRMDefinitionHoleType_CboreDefinition

Type of Definition containing information specific to Counter Bore Hole:

Parameter Data:
- DoubleData Depth: bore depth
- DoubleData Diameter: bore diameter
- IntegerData Boolean: isBoreOutside: true if the bore is outside the hole, on the other side of the profile (specific to CATIA)

enumerator kA3DFRMDefinitionHoleType_SunkDefinition

Type of Definition containing information specific to Sunk Hole:

Parameter Data:
- Value Diameter: sunk diameter
- Value Angle: sunk angle

enumerator kA3DFRMDefinitionHoleType_TaperedDefinition

Type of Definition containing information specific to Tapered Hole:

Parameter Specification:
- EnumData DepthLevel: depth level where tapered angle is applied. see EA3DFRMEnumValue_DepthLevel
Parameter Data:
- Value Angle: tapered angle

enumerator kA3DFRMDefinitionHoleType_StandardDefinition: Type of Definition containing information specific to Hole Standard.

enumerator kA3DFRMDefinitionHoleType_ElementDefinition

Type of Definition containing information specific to Hole defined by elements:

Parameter Data:
- Depth: Depth of the element.
- Hole Shape: Shape of the element.
- Thread: Thread of the element (optional)