A3DMDDimensionSimpleToleranceFormatData

struct A3DMDDimensionSimpleToleranceFormatData

Structure that describes dimension tolerance format.

A3DMDDimensionSimpleToleranceFormatGet, A3DMDDimensionValueData

• 1: Numerical side by side,
• 2: Numerical super-imposed,
• 3: Resolved numerical side by side,
• 4: Resolved numerical super-imposed,
• 5: Alphanumerical single value,
• 6: Alphanumerical side by side,
• 7: Alphanumerical super-imposed.

for member m_iType:

for member m_dSymbolH: Ratio between separator character and value text font sizes

• m_iTrailing & ~kA3DMDTrailingToleranceConsistentDigitsMask == 0: Display (number of digits specified in the value precision),
• m_iTrailing & ~kA3DMDTrailingToleranceConsistentDigitsMask == 1: No Display,
• m_iTrailing & ~kA3DMDTrailingToleranceConsistentDigitsMask == 2: Same “display” mode as the dimension value
• In case of separate values for numerical tolerances (m_iType = 1 or 2 and m_iMergeSame = 2), the m_iTrailing control bit (whose value is obtained through kA3DMDTrailingToleranceConsistentDigitsMask) indicates if the number of digits between the ‘plus’ and ‘minus’ tolerances is consistent or not. Concretely, it means that one of the tolerances will still have some trailing zeros. For example, if m_iTrailing & kA3DMDTrailingToleranceConsistentDigitsMask == kA3DMDTrailingToleranceConsistentDigitsMask and m_iTrailing & ~kA3DMDTrailingToleranceConsistentDigitsMask == 1, the annotation 12.34567(+0.01000; -0.10000) is displayed as 12.34567(+0.01; 0.10) while it would have been displayed as 12.34567(+0.01; 0.1) if m_iTrailing & kA3DMDTrailingToleranceConsistentDigitsMask == 0

for member m_iTrailing: Display of tolerance trailing zeros. This value is composed of a control bit and the actual value

• 1: No fraction line,
• 2: Fraction line.

for member m_iFractLine:

• 7: Top,
• 8: Middle,
• 9: Bottom.

for member m_iPtOnValue:

• 1: Top,
• 2: Middle,
• 3: Bottom.

for member m_iAnchorPt:

• 1: Display common value,
• 2: Display separate values.

for member m_iMergeSame:

• 1: Display null value with sign,
• 2: Display null value without sign,
• 3: No display of null value.

for member m_iShowNull: for numerical tolerances only and

Index

Variables

• m_pcName
• m_iType
• m_iSepar_1
• m_iSepar_2
• m_dSymbolH
• m_iSepTo_1
• m_iSepTo_2
• m_iSepTo_3
• m_iTrailing
• m_iFractLine
• m_iPtOnValue
• m_iAnchorPt
• m_dIntX
• m_dIntY
• m_dExtX
• m_dExtY
• m_iMergeSame
• m_iShowNull
• m_dScale

Variables

A3DUTF8Char *A3DMDDimensionSimpleToleranceFormatData.m_pcName

A3DUTF8Char*

Name of the tolerance format.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iType

A3DInt32

Tolerance format type : 1 = Numerical side by side, 2 = Numerical super-imposed 3 = Resolved Numerical side by side, 4 = Resolved numerical super-imposed 5 =Alphanumerical Single Value, 6 = Alphanumerical side by side, 7 = Alphanumerical super-imposed.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iSepar_1

A3DInt32

Separators for super-imposed tolerances.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iSepar_2

A3DInt32

Separators for super-imposed tolerances.

A3DDouble A3DMDDimensionSimpleToleranceFormatData.m_dSymbolH

A3DDouble

Separator character size.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iSepTo_1

A3DInt32

Separators for side-by-side tolerances.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iSepTo_2

A3DInt32

Separators for side-by-side tolerances.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iSepTo_3

A3DInt32

Separators for side-by-side tolerances.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iTrailing

A3DInt32

Trailing 0 display.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iFractLine

A3DInt32

Fraction line.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iPtOnValue

A3DInt32

Tolerance position anchor point (for offset computing).

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iAnchorPt

A3DInt32

Anchor position.

A3DDouble A3DMDDimensionSimpleToleranceFormatData.m_dIntX

A3DDouble

Offset between the 2 tolerance values: X value.

A3DDouble A3DMDDimensionSimpleToleranceFormatData.m_dIntY

A3DDouble

Offset between the 2 tolerance values: Y value.

A3DDouble A3DMDDimensionSimpleToleranceFormatData.m_dExtX

A3DDouble

Offset between dimension value and tolerance: X value.

A3DDouble A3DMDDimensionSimpleToleranceFormatData.m_dExtY

A3DDouble

Offset between dimension value and tolerance: Y value.

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iMergeSame

A3DInt32

Display of identical tolerance values (for numerical tolerances only).

A3DInt32 A3DMDDimensionSimpleToleranceFormatData.m_iShowNull

A3DInt32

Display of null tolerance values.

A3DDouble A3DMDDimensionSimpleToleranceFormatData.m_dScale

A3DDouble

Scale.