A3DCopyAndAdaptBrepModelData

struct A3DCopyAndAdaptBrepModelData

Copy and convert to NURBS parameter.

Index

Variables

Variables

A3DBool A3DCopyAndAdaptBrepModelData.m_bUseSameParam: A3DBool

If A3D_TRUE, surfaces will keep their parametrization when converted to NURBS.

Tolerance value of the resulting B-rep.

This value is relative to the scale of the model. We would suggest adapting it from the model bounding box

A3DBool A3DCopyAndAdaptBrepModelData.m_bDeleteCrossingUV: A3DBool

If A3D_TRUE, UV curves that cross seams of periodic surfaces are replaced by 3D curves.

A3DBool A3DCopyAndAdaptBrepModelData.m_bSplitFaces: A3DBool

If A3D_TRUE, the faces with a periodic basis surface are split on parametric seams.

A3DBool A3DCopyAndAdaptBrepModelData.m_bSplitClosedFaces: A3DBool

If A3D_TRUE, the faces with a closed basis surface are split into faces at the parametric seam and mid-parameter.

A3DBool A3DCopyAndAdaptBrepModelData.m_bForceComputeUV: A3DBool

If A3D_TRUE, UV curves are computed from the B-rep data.

If A3D_TRUE and m_bForceComputeUV is set to A3D_TRUE, computed UV curves can cross seams.

9.0

It will be automatically disabled if m_bSplitFaces or m_bSplitClosedFaces are set to A3D_TRUE.

A3DBool A3DCopyAndAdaptBrepModelData.m_bForceCompute3D: A3DBool

If A3D_TRUE, 3D curves are computed from the B-rep data.

A3DUns32 A3DCopyAndAdaptBrepModelData.m_uiAcceptableSurfacesSize: A3DUns32

Length of m_puiAcceptableSurfaces array.

A list of acceptable surface types that your modeler can handle.

Acceptable surface types are listed in A3DSDKTypes.h and begin with ‘kA3DTypeSurf’

A3DUns32 A3DCopyAndAdaptBrepModelData.m_uiAcceptableCurvesSize: A3DUns32

Length of m_puiAcceptableCurves array.

A list of acceptable curve types that your modeler can handle.

Acceptable curve types are listed in A3DSDKTypes.h and begin with ‘kA3DTypeCrv’

For preserving what has already been processed after an error occurs.

A3DBool A3DCopyAndAdaptBrepModelData.m_bClampTolerantUVCurvesInsideUVDomain

If A3D_FALSE, UV curves may stray outside the UV domain as long as the 3D edge tolerance is respected.

If set to A3D_TRUE, the UV curves will be clamped to the UV domain (if the clamp still leaves them within the edge tolerance).

A3DBool A3DCopyAndAdaptBrepModelData.m_bForceDuplicateGeometries: A3DBool

If A3D_TRUE, break the sharing of surfaces and curves into topologies.