CircularWedgeKit
-
class CircularWedgeKit : public HPS::Kit
The CircularWedgeKit class is a user space object. It is a kit analog to a CircularWedgeKey.
Public Functions
-
CircularWedgeKit()
The default constructor creates an empty CircularWedgeKit object.
-
CircularWedgeKit(CircularWedgeKit &&in_that)
The move constructor creates a CircularWedgeKit by transferring the underlying impl of the rvalue reference to this CircularWedgeKit thereby avoiding a copy and allocation.
- Parameters:
in_that – An rvalue reference to a CircularWedgeKit to take the impl from.
-
CircularWedgeKit(CircularWedgeKit const &in_kit)
The copy constructor creates a new CircularWedgeKit object that contains the same settings as the source CircularWedgeKit.
- Parameters:
in_kit – The source CircularWedgeKit to copy.
-
void Consume(CircularWedgeKit &in_kit)
Copies the source CircularWedgeKit into this CircularWedgeKit and resets the source kit.
- Parameters:
in_kit – The source CircularWedgeKit to consume.
-
virtual bool Empty() const
Indicates whether this CircularWedgeKit has any values set on it.
- Returns:
true if no values are set on this CircularWedgeKit, false otherwise.
-
bool Equals(CircularWedgeKit const &in_kit) const
Check if the source CircularWedgeKit is equivalent to this CircularWedgeKit.
- Parameters:
in_kit – The source CircularWedgeKit to compare to this CircularWedgeKit.
- Returns:
true if the objects are equivalent, false otherwise.
-
inline virtual HPS::Type ObjectType() const
This function returns the type the object, as declared (if the object is derived, this does not give the true type of the derived object).
- Returns:
The declared type of the object in question, which may differ from the true, underlying type.
-
bool operator!=(CircularWedgeKit const &in_kit) const
Check if the source CircularWedgeKit is not equivalent to this CircularWedgeKit.
- Parameters:
in_kit – The source CircularWedgeKit to compare to this CircularWedgeKit.
- Returns:
true if the objects are not equivalent, false otherwise.
-
CircularWedgeKit &operator=(CircularWedgeKit &&in_that)
The move assignment operator transfers the underlying impl of the rvalue reference to this CircularWedgeKit thereby avoiding a copy.
- Parameters:
in_that – An rvalue reference to a CircularWedgeKit to take the impl from.
- Returns:
A reference to this CircularWedgeKit.
-
CircularWedgeKit &operator=(CircularWedgeKit const &in_kit)
Copies the source CircularWedgeKit into this CircularWedgeKit.
- Parameters:
in_kit – The source CircularWedgeKit to copy.
- Returns:
A reference to this CircularWedgeKit.
-
bool operator==(CircularWedgeKit const &in_kit) const
Check if the source CircularWedgeKit is equivalent to this CircularWedgeKit.
- Parameters:
in_kit – The source CircularWedgeKit to compare to this CircularWedgeKit.
- Returns:
true if the objects are equivalent, false otherwise.
-
void Set(CircularWedgeKit const &in_kit)
Copies the source CircularWedgeKit into this CircularWedgeKit.
- Parameters:
in_kit – The source CircularWedgeKit to copy.
-
CircularWedgeKit &SetEnd(Point const &in_end)
Sets the end point for this CircularWedgeKit. This is the point on the circumference of the circle at which the circular wedge ends.
- Parameters:
in_end – The end point for this CircularWedgeKit.
- Returns:
A reference to this CircularWedgeKit.
-
CircularWedgeKit &SetMiddle(Point const &in_middle)
Sets the middle point for this CircularWedgeKit. This is a point on the circumference of the circle between the start and end points for the circular wedge.
- Parameters:
in_middle – The middle point for this CircularWedgeKit.
- Returns:
A reference to this CircularWedgeKit.
-
CircularWedgeKit &SetPriority(int in_priority)
Assigns a specific drawing priority value to the CircularWedgeKit. It affects the order in which the contents of this segment are drawn if and only if the rendering algorithm is set to Priority.
See also
SubwindowKit::SetPriority()
- Parameters:
in_priority – The drawing priority, higher priority items are drawn on top of lower priority items.
- Returns:
A reference to this object.
-
CircularWedgeKit &SetStart(Point const &in_start)
Sets the start point for this CircularWedgeKit. This is the point on the circumference of the circle at which the circular wedge starts.
- Parameters:
in_start – The start point for this CircularWedgeKit.
- Returns:
A reference to this CircularWedgeKit.
-
CircularWedgeKit &SetUserData(intptr_t in_index, ByteArray const &in_data)
Sets user data on this kit.
- Parameters:
in_index – The index of the user data to set.
in_data – The bytes of user data to set.
- Returns:
A reference to this kit.
-
CircularWedgeKit &SetUserData(intptr_t in_index, size_t in_bytes, byte const in_data[])
Sets user data on this kit.
- Parameters:
in_index – The index of the user data to set.
in_bytes – The number of bytes of user data to set.
in_data – The bytes of user data to set.
- Returns:
A reference to this kit.
-
CircularWedgeKit &SetUserData(IntPtrTArray const &in_indices, ByteArrayArray const &in_data)
Sets user data on this kit.
- Parameters:
in_indices – An array of user data indices to set.
in_data – An array of bytes of user data to set.
- Returns:
A reference to this kit.
-
void Show(CircularWedgeKit &out_kit) const
Copies this CircularWedgeKit into the given CircularWedgeKit.
- Parameters:
out_kit – The CircularWedgeKit to populate with the contents of this CircularWedgeKit.
-
bool ShowEnd(Point &out_end) const
Shows the end point for this CircularWedgeKit.
- Parameters:
out_end – The end point for this CircularWedgeKit.
- Returns:
true if an end point was set, false otherwise.
-
bool ShowMiddle(Point &out_middle) const
Shows the middle point for this CircularWedgeKit.
- Parameters:
out_middle – The middle point for this CircularWedgeKit.
- Returns:
true if a middle point was set, false otherwise.
-
bool ShowPriority(int &out_priority) const
Shows the drawing priority.
- Parameters:
out_priority – The drawing priority, higher priority items are drawn on top of lower priority items.
- Returns:
true if the setting is valid, false otherwise.
-
bool ShowStart(Point &out_start) const
Shows the start point for this CircularWedgeKit.
- Parameters:
out_start – The start point for this CircularWedgeKit.
- Returns:
true if a start point was set, false otherwise.
-
bool ShowUserData(intptr_t in_index, ByteArray &out_data) const
Shows the user data at a given index for this kit.
- Parameters:
in_index – The index of the user data to show.
out_data – The user data at the given index.
- Returns:
true if there is user data at the given index, false otherwise.
-
bool ShowUserData(IntPtrTArray &out_indices, ByteArrayArray &out_data) const
Shows all user data for this kit.
- Parameters:
out_indices – An array of all user data indices set on this kit.
out_data – An array of all user data set on this kit.
- Returns:
true if there is user data on this kit, false otherwise.
-
size_t ShowUserDataCount() const
Get the number of user data indices set on this kit.
-
bool ShowUserDataIndices(IntPtrTArray &out_indices) const
Shows the indices of all user data set on this kit.
- Parameters:
out_indices – The user data indices set on this kit.
- Returns:
The number of user data indices set on this kit.
-
CircularWedgeKit &UnsetAllUserData()
Removes all user data from this kit.
- Returns:
A reference to this kit.
-
CircularWedgeKit &UnsetEnd()
Removes the end point for this CircularWedgeKit.
- Returns:
A reference to this CircularWedgeKit.
-
CircularWedgeKit &UnsetEverything()
Removes all settings from the CircularWedgeKit.
- Returns:
A reference to this CircularWedgeKit.
-
CircularWedgeKit &UnsetMiddle()
Removes the middle point for this CircularWedgeKit.
- Returns:
A reference to this CircularWedgeKit.
-
CircularWedgeKit &UnsetPriority()
Removes a drawing priority setting.
- Returns:
A reference to this object.
-
CircularWedgeKit &UnsetStart()
Removes the start point for this CircularWedgeKit.
- Returns:
A reference to this CircularWedgeKit.
-
CircularWedgeKit &UnsetUserData(intptr_t in_index)
Removes the user data at the given index from this kit.
- Parameters:
in_index – The index of the user data to remove.
- Returns:
A reference to this kit.
-
CircularWedgeKit &UnsetUserData(IntPtrTArray const &in_indices)
Removes the user data at the given indices from this kit.
- Parameters:
in_indices – The indices of the user data to remove.
- Returns:
A reference to this kit.
-
CircularWedgeKit &UnsetUserData(size_t in_count, intptr_t const in_indices[])
Removes the user data at the given indices from this kit.
- Parameters:
in_count – The size of the following array.
in_indices – The indices of the user data to remove.
- Returns:
A reference to this kit.
-
virtual ~CircularWedgeKit()
-
CircularWedgeKit()