Fixed Bugs List

As of 2022-12-20

  • HE 2023

    • SDHE-20028: Fixed crash while importing IGES file

    • SDHE-19961: Fixed SolidWorks k-factors not retrieved for sub-nodes

    • SDHE-19960: Fixed incorrect simplification with A3DSimplifyModelFileWithAnalytics

    • SDHE-19931: Fixed incorrect color

    • SDHE-19930: Fixed crash upon calling A3DAsmModelFileLoadFromFile

    • SDHE-19924: Fixed overlapping items in imported files

    • SDHE-19904: Fixed issue upong loading from Solid Edge

    • SDHE-19891: Fixed regression of JavaScript errors reported in monolithic HTML

    • SDHE-19884: Fixed crash upon loading from SolidWorks

    • SDHE-19854: Fixed missing geometry when converting an IPT file

    • SDHE-19840: Fixed issue upon loading from NX

    • SDHE-19815: Fixed issue upon loading from Creo 7

    • SDHE-19809: Fixed failing import of IFC

    • SDHE-19781: Fixed incorrect export of wireframes to STEP AP242

    • SDHE-19780: Add support for JAMA IGES files

    • SDHE-19766: Fixed unresolvable node references in JT exports

    • SDHE-19763: Added an option to distinguish Creo PMIs with same dimension

    • SDHE-19748: Fixed A3DRootBaseAttributeRemoveAt not removing the attribute on first call

    • SDHE-19741: Fixed incorrect import of Creo 7.0 files

    • SDHE-19729: Fixed error upon calling A3DPRojectPointCloud2

    • SDHE-19682: Fixed crash upon reading from STEP

    • SDHE-19672: Fixed crash when translating Revit files

    • SDHE-19644: Fixed crash upon importing from Solid Edge 2022

    • SDHE-19629: Fixed crash upon opening CATIA files with PMI

    • SDHE-19625: Fixed crash upon calling A3DAsmModelFileLoadFromfile with Revit

    • SDHE-19619: Fixed missing surfaces on IGES model

    • SDHE-19593: Fix support for kA3DTypeRiDirection

    • SDHE-19586: Fixed loading of Revit files

    • SDHE-19563: Fixed incorrect thread hole position from Creo file

    • SDHE-19490: Fix display of Parasolid part names

    • SDHE-19469: Fix import of DXF files

    • SDHE-19458: Fix incorrect edge angle in tessellation

    • SDHE-19416: Fix memory leaks on file import

    • SDHE-19412: Fix error while loading Creo file

    • SDHE-19408: Fixed crash converting DXF file to STEP

    • SDHE-19403: Fixed opening of Creo 4.0 top assembly

    • SDHE-19398: Fixed incorrect parsing of CREO PMI

    • SDHE-19390: Fixed crash upon reading SolidWorks B-Rep data

    • SDHE-19378: Fixed loading of IFC file

    • SDHE-19133: Fixed DXF elliptical arcs

    • SDHE-19086: Fixed crash upon calling A3DAsmModelFileLoadFromFile with Revit

    • SDHE-19067: Fixed incorrect SW-Configuration Name in CAD assembly

    • SDHE-19038: Fixed crash upon loading from JT containing B-Rep

    • SDHE-18755: Fixed lock upon loading SDLASM file

    • SDHE-18717: Fixed DWG/DXF text position

    • SDHE-18707: Fixed missing markup text after exporting to PRC

    • SDHE-18665: Fixed visibility in Revit Design Option

    • SDHE-18525: Fixed Revit shapes displayed as bounding boxes

    • SDHE-18514: Fixed Revit tessellation replaced by bounding boxes

    • SDHE-18512: Fixed position and color of DWG PMI

    • SDHE-18426: Fixed incorrect orientation of wire edges in Tess3D

    • SDHE-18390: Fixed incomplete import of composite GDT

    • SDHE-18230: Fixed crash upon calling A3DCollisionCompute

    • SDHE-18194: Fixed size of annotation in CATPart

    • SDHE-18158: Fixed invalid ACIS curves and surfaces with coincident control points

    • SDHE-18025: Fixed orientation of Dimension Leader Lines from CATIAV5

    • SDHE-17652: Fixed Issue with Nested Parameter Sets

    • SDHE-17607: Fixed an issue in the translation of links from annotations to faces in CATIA

    • SDHE-17352: Fixed mispositioned PMI leader from CATIA file

    • SDHE-17351: Fixed issue with line styles in HOOPS Exchange

    • SDHE-13970: Fixed missing PMI data from CATIA assembly

    • SDHE-12247: Fixed evaluation of curve length

    • SDHE-12101: Improved reading of Type properties with Revit files objects

    • SDHE-11975: Fixed parameter range for ellipse

  • HE 2022 SP2 U1

    • SDHE-19798: Fixed error upon reading SAB file

    • SDHE-19749: Improved performances of GLTF Export

    • SDHE-19745: Improved performances of GLTF Export

    • SDHE-19681: Fixed partal import upon reading CV5 file

    • SDHE-19676: Fix broken STEP export when decimal character is changed

    • SDHE-19663: Fixed error upon importing cylinders from NWD

    • SDHE-19632: Improved performances of GLTF export

    • SDHE-19628: Fixed error upon loading from NX

    • SDHE-19606: Fixed incorrect PMI with JT

    • SDHE-19604: Fixed errors with IGES NURBS

    • SDHE-19599: Fixed crash upon importing IFC

    • SDHE-19597: Fixed crash upon importing IFC

    • SDHE-19575: Fixed incorrect torus data when calling A3DSimplifySurfaceWithAnalytics

    • SDHE-19525: Fixed missing model in the capture of 3DXML output file

    • SDHE-19522: Fixed incorrect geometry with accurate tessellation

    • SDHE-19518: Fixed CV5ImportedBodyName being sometimes empty in CV5 models

    • SDHE-19496: Fixed missing symbols in some NX PMIs

    • SDHE-19435: Improved performances upon exporting to GLTF

    • SDHE-19430: Fixed crash upon reading some IFC files

    • SDHE-19400: Fixed incorrect colors with JT 9.5 files

    • SDHE-19104: Fixed incorrect text from in PDF

    • SDHE-19075: Improved performances with GLTF Export

    • SDHE-18892: Fixed missing datum association within CV5

    • SDHE-18873: Fixed incorrect toroidal NURBS data

    • SDHE-12705: Fixed extra geometry with JT files

    • SDHE-12283: Fixed issues upon rendering with specific fonts

    • SDHE-12040: Fixed incorrect spacing between lines of text in CATIA

    • SDHE-12035: Fixed incorrect PMI tessellation with JT

  • HE 2022 SP2

    • SDHE-19552: Fixed error upon importing from NX

    • SDHE-19540: Fixed failed assertion upon calling A3DCollisionCompute

    • SDHE-19500: Fixed crash upon calling A3DMiscComputeBoundingBox

    • SDHE-19493: Fixed incorrect value un NX Datum Target PMIs

    • SDHE-19488: Fixed error upon loading from SolidWorks

    • SDHE-19467: Fixed error upon loading from SolidWorks

    • SDHE-19410: Fixed loss of PMI link

    • SDHE-19345: Fixed crash upon calling A3DGet3DPDFStrams

    • SDHE-19330: Fixed loss of K-Factors upon translation from SLDPRT to STEP

    • SDHE-19304: Fixed errors when converting parts with convergent bodies to STL

    • SDHE-19291: Fixed error upon reading from STEP from Linux

    • SDHE-19265: Fixed incorrect name changes upon calling A3DAsmModelFileSew

    • SDHE-19260: Fixed error upon calling A3DCurveLength on poly-line

    • SDHE-19245: Fixed missing NURBS upon exporting to IGES

    • SDHE-19185: Fixed missing semantic reference after surface offset

    • SDHE-19037: Fixed error upon converting IFC to PNG/PDF

    • SDHE-19014: Fixed issue while loading complex inventor 2022 assemblies

    • SDHE-19008: Fixed issue with RTF parsing on Linux

    • SDHE-18986: Fixed error with collisions

    • SDHE-18934: Fixed messages using standard output instead of reporting callbacks

    • SDHE-18600: Improved performances on A3DComputeOrthoHLROnModelFile3

    • SDHE-18375: Fixed incorrect sphere after CopyAndAdapt split on ACIS file

    • SDHE-17893: Fixed encoding of attributes

    • SDHE-17865: Fixed error while reading from JT

    • SDHE-17851: Fixed memory leak upon calling A3DColisionCompute

    • SDHE-17844: Fixed freeze upon loading from STEP

    • SDHE-17412: Fixed incorrect face color in Inventor

    • SDHE-12134: Fixed incorrect conversion result with Parasolid

    • SDHE-12051: Fixed incorrect UV curves on spherical face from STEP

  • HE 2022 SP1 U1

    • SDHE-19447: Fixed visibility of datum planes in Creo files

    • SDHE-19380: Fixed error upon loading Creo 8.0 files

    • SDHE-19252: Fixed NURBS faces in Catia V5

    • SDHE-19195: Fixed missing T sections upon importing from IFC

    • SDHE-19158: Fixed cut-off in small max coord height faceting values

    • SDHE-18974: Fixed missing leaders in Creo

    • SDHE-18971: Fixed incorrect placements in Creo

    • SDHE-18963: Fixed incorrect placements of datum targets in Creo

    • SDHE-18962: Fixed appearance of dimension in Creo

    • SDHE-18956: Fixed appearance of dimensions in Creo

    • SDHE-18955: Fixed flipped PMI in Creo

    • SDHE-18839: Fixed failed loading upon reading from Inventor

    • SDHE-18518: Improved performances of DWG conversion

    • SDHE-18395: Improved texture retrieval

    • SDHE-17513: Fixed incorrect results with A3DAsmModelFileSew

  • HE 2022 SP1

    • SDHE-19226: Fixed incorrect results and missing lines when computing HLR

    • SDHE-19213: Fixed PMI Viewing in SolidWorks File

    • SDHE-18913: Fix HTML export when using non-default configuration

    • SDHE-18889: Fixed crash upon reading some Revit files

    • SDHE-18808: Fixed incorrect curve with translation to Parasolid

    • SDHE-18749: Fixed a crash upon importing from JT 9.5

    • SDHE-18724: Fixed crash upon reading Revit model

    • SDHE-18541: Fixed incorrect UV curve after splitting a STEP file

    • SDHE-18530: Fixed wrong UV curve adter splitting from STEP

    • SDHE-18385: Fixed crash upon importing from Revit

    • SDHE-18144: Fixed crash upon importing from IGES files

    • SDHE-18138: Fixed incorrect transparency from SolidWorks

    • SDHE-18105: Fixed units inconsistency

    • SDHE-18065: Fixed incorrect UV curves after converting to NURBS

    • SDHE-17888: Fixed export of Revit textures to FBX

    • SDHE-17820: Fixed colors when exporting to STEP

    • SDHE-17513: Fixed incorrect results with A3DAsmModelFileSew

    • SDHE-17401: Fixed color when exporting to JT

    • SDHE-17365: Fixed A3DGraphCameraData parameters read for Creo

    • SDHE-12484: Fixed issue upon reading from Inventor

    • SDHE-12263: Fixed incorrect revolution faces from Inventor

    • SDHE-12219: Fixed colors upon exporting to STEP

  • HE 2022 U2

    • SDHE-18585: Fixed DFX files not reading the correct unit

  • HE 2022 U1

    • SDHE-19220: Fixed empty translation of Rhino model

    • SDHE-19204: Fixed missing polygon from tessellation

    • SDHE-19201: Fixed output from A3DRepresentationItemExportToAcisBuffer

    • SDHE-19200: Fixed corrupted STP exported from HE 2021 SP2 U2

    • SDHE-19152: Fixed memory issues

    • SDHE-19151: Fixed memory issues

    • SDHE-19150: Fixed memory issues

    • SDHE-19149: Fixed memory issues

    • SDHE-19148: Fixed memory leaks with exporter

    • SDHE-19147: Fixed memory leaks with exporter

    • SDHE-19145: Fixed memory leaks with exporter

    • SDHE-19139: Fixed memory issues

    • SDHE-19138: Fixed incorrect mesh when importing from Catia V5

    • SDHE-19128: Fixed import of Creo NEU files

    • SDHE-19093: Fixed incorrect export from FBX

    • SDHE-19076: Fixed incorrect color overrides in PRC exports

    • SDHE-19052: Fixed error upon reading from ASM

    • SDHE-19034: Fixed sketch data curve type for SolidWorks files

    • SDHE-19032: Fixed missing PMI references on Creo 7 models

    • SDHE-19027: Fixed missing value in feature tree

    • SDHE-19005: Fixed memory issues

    • SDHE-19004: Fixed memory issues

    • SDHE-19003: Fixed memory issues

    • SDHE-19002: Fixed memory issues

    • SDHE-19001: Fixed memory issues

    • SDHE-18998: Fixed memory issues

    • SDHE-18977: Fixed error while converting to PDF

    • SDHE-18972: Fixed datum tags moved

    • SDHE-18967: Fixed missing reference dimension

    • SDHE-18964: Fixed split of combined tolerance/dimension

    • SDHE-18960: Fixed datum targets moved

    • SDHE-18959: Fixed incorrect export to PDF

    • SDHE-18957: Fixed inconsistency with leading 0 in tolerances

    • SDHE-18949: Fixed support for coordinate systems

    • SDHE-18928: Fixed incorrect thread depth in SolidWorks file

    • SDHE-18903: Fixed unexpected UV computation for Parasolid face

    • SDHE-18885: Fixed decimal separator

    • SDHE-18277: Fixed incorrect thread depth from SolidWorks file

    • SDHE-18233: Fixed missing attributes after using A3DAdaptAndReplace

    • SDHE-18059: Fixed missing faces upon reading from STEP

    • SDHE-17768: Fixed missing or incorrect faces from Inventor

    • SDHE-17767: Fixed missing faces from Inventor

    • SDHE-17766: Fixed incorrect faces from Inventor

    • SDHE-17623: Fixed missing faces from Inventor

    • SDHE-12448: Fixed incorrect faces from Inventor

    • SDHE-12273: Fixed incorrect thread depth and pitch from SolidWorks

    • SDHE-12177: Fixed missing faces from Inventor

    • SDHE-12106: FIxed incorrect face conversion from Inventor

    • SDHE-12056: Fixed incorrect faces upon reading from Inventor

  • HE 2022

    • SDHE-19148: Fixed memory leaks with exporter

    • SDHE-19147: Fixed memory leaks with exporter

    • SDHE-19145: Fixed memory leaks with exporter

    • SDHE-19057: Fixed incorrect characters upon exporting to SAT

    • SDHE-19034: Fixed sketch data curve type for SolidWorks files

    • SDHE-19027: Fixed missing value in feature tree

    • SDHE-18953: Fixed incorrect transform upon exporting to STEP from Linux

    • SDHE-18905: Fixed crash upon computing HLR

    • SDHE-18856: Fixed invalid CATIA V5 file after export

    • SDHE-18824: Fixed error upon loading CATIA files with relative paths

    • SDHE-18748: Fixed missing faces with IGES files

    • SDHE-18708: Fixed unexpected size increase in PDF exports

    • SDHE-18643: Fixed crash upon exporting from CV5 to IGES

    • SDHE-18614: Fixed error upon importing from NX

    • SDHE-18575: Fixed missing window cutouts upon importing from IFC

    • SDHE-18484: Fixed duplicated root node upon exporting to FBX

    • SDHE-18368: Fixed crash upon sewing SolidWorks part

    • SDHE-18354: Fixed crash upon importing from GLTF

    • SDHE-18283: Fixed crash upon loading from SolidWorks

    • SDHE-18277: Fixed incorrect thread depth from SolidWorks file

    • SDHE-18061: Fixed missing parts in STEP files

    • SDHE-17756: Fixed incorrect color from STEP file

    • SDHE-17454: Fixed issue with SolidWorks flexible assemblies

    • SDHE-13277: Added support for Reference Dim and Ordinate Ref Dim

    • SDHE-12906: Fixed missing parts upon exporting to STEP

    • SDHE-12714: Fixed crash upon importing from SAT

    • SDHE-12683: Fixed parts exported as assemblies upon exporting to Parasolid

    • SDHE-12368: Fixed memory leaks with SolidWorks files

    • SDHE-12273: Fixed incorrect thread depth and pitch from SolidWorks

    • SDHE-12219: Fixed colors upon exporting to STEP

    • SDHE-12098: Fixed handling of boolean in some IFC models

  • HE 2021 SP2 U2

    • SDHE-18851: Fixed a crash upon calling A3DPkPartsTranslateToA3DAsmModelFile

    • SDHE-18842: Fixed A3DCrvLineData incorrect when creating a line with large coefficients

    • SDHE-18841: Fixed missing face colors from STEP

    • SDHE-18781: Fixed invalid FBX files upon export

    • SDHE-18626: Fixed colors not read from STEP file

    • SDHE-18567: Fixed colors of transparent surfaces not displayed

    • SDHE-18556: Fixed a crash upon reading 3DXML file

    • SDHE-18301: Fixed wrong face colors from STEP file

    • SDHE-18282: Fixed Parasolid and reading BTI/InstanceId from OnShape

    • SDHE-18258: Fixed incorrect shape of IFC data

    • SDHE-18204: Fixed missing piping geometry from CATIA V5 assembly

    • SDHE-18159: Fixed Rhino model not translated correctly

    • SDHE-18147: Fixed duplicate attribute of IFC

    • SDHE-18121: Fixed memory leaks

    • SDHE-18093: Fixed STEP file not imported correctly

    • SDHE-18001: Fixed partial import of some IFC files

    • SDHE-17831: Fixed wrong face colors from STEP file

    • SDHE-17765: Fixed incorrect Surfaces on some CATPart files

    • SDHE-17654: Fixed JT Structure issue

    • SDHE-17516: Fixed error upon importing some FBX file

    • SDHE-17377: Fixed error upon importing from FBX

    • SDHE-12905: Fixed missing parts from 3DXML

    • SDHE-12824: Fixed missing items from 3DXML

    • SDHE-12759: Fixed change of assembly structure in exported Parasolid

    • SDHE-12700: Fixed incorrect colors in STEP model

    • SDHE-12646: Fixed addition of additional top level node during X_T export

    • SDHE-12339: Fixed error in ACIS kernel from exported files

    • SDHC-18244: Fixed SIGSEV occurring during conversion of 3DXML File

  • HE 2021 SP2 U1

    • SDHE-18719: Prevent initialization failing when only core logic binaries are available

    • SDHE-18660: Fixed a crash upon exporting to IGES

    • SDHE-18658: Fixed incorrect loading of UG file

    • SDHE-18642: Fixed missing virtual components

    • SDHE-18612: Fixed crash upon exporting to FBX

    • SDHE-18606: Fixed incorrect import from some SOLIDWORKS 2020 files

    • SDHE-18603: Fixed a crash upon reading from JT file

    • SDHE-18592: Fixed error while reading from IPT file

    • SDHE-18577: Fixed segmentation fault upon callin A3DAsmModelFileTranslateToPkParts

    • SDHE-18572: Fixed missing curve color from Rhino

    • SDHE-18570: Fixed incorrect handling of IFC attributes when title collides with IFCPROPERTYSET

    • SDHE-18545: Fixed crash with JT reader

    • SDHE-18543: Fixed crash upon reading from empty NX assemblies

    • SDHE-18524: Fixed incorrect Parasolid files exported using multiproc

    • SDHE-18521: Fixed error handling upon reading from Revit

    • SDHE-18517: Fixed error while importing a SolidWorks part

    • SDHE-18474: Fixed segmentation fault upon reading from Inventor files

    • SDHE-18472: Fixed error upon loading from SolidWorks assembly

    • SDHE-18467: Fixed crash upon exporting from CATIA V5 to STEP

    • SDHE-18418: Fixed incorrect error message upon loading DXF files

    • SDHE-18318: Fixed incorrect conversion of special characters in attributes values with Revit

    • SDHE-18312: Fixed incorrect encoding of metadata characters with Revit

    • SDHE-18240: Fixed report of missing files from internal SolidWorks assemblies

    • SDHE-18052: Fixed incorrect conversion from STEP to Parasolid

    • SDHE-17982: Fixed loading of attributes

    • SDHE-17793: Fixed crash with Viewer sample upon reading from U3D

    • SDHE-17571: Fixed crash upon calling A3DRiRepresentationItemComputeTessellation on macOS

    • SDHE-12357: Fixed STEP AP242 not supporting material

  • HE 2021 SP2

    • SDHV-10432: Fixed incorrect edge trimming upon reading from Parasolid

    • SDHE-18658: Fixed incorrect loading of UG file

    • SDHE-18642: Fixed missing virtual components

    • SDHE-18606: Fixed incorrect import from some SOLIDWORKS 2020 files

    • SDHE-18592: Fixed error while reading from IPT file

    • SDHE-18572: Fixed missing curve color from Rhino

    • SDHE-18570: Fixed incorrect handling of IFC attributes when title collides with IFCPROPERTYSET

    • SDHE-18521: Fixed error handling upon reading from Revit

    • SDHE-18517: Fixed error while importing a SolidWorks part

    • SDHE-18493: Fixed missing area and volume attributes in Revit

    • SDHE-18472: Fixed error upon loading from SolidWorks assembly

    • SDHE-18468: Fixed incorrect import of JT views

    • SDHE-18418: Fixed incorrect error message upon loading DXF files

    • SDHE-18412: Fixed error while reading from 3DXML

    • SDHE-18398: Fixed error while loading SLDASM file

    • SDHE-18384: Fixed incorrect tessellation on NX file

    • SDHE-18372: Fixed incorrect decimal in CREO 4

    • SDHE-18337: Fixed incorrect reading of nested STPX

    • SDHE-18275: Fixed incorrect faces from IGES tessellation

    • SDHE-18274: Fixed missing CAD view from JT file

    • SDHE-18240: Fixed report of missing files from internal SolidWorks assemblies

    • SDHE-18211: Fixed crash upon reading from CATIA

    • SDHE-18092: Fixed missing Link to Part Instance from CATIA

    • SDHE-18073: Fixed support for I-DEAS 6.5

    • SDHE-18056: Fixed incorrect Linked Item from CV5

    • SDHE-18052: Fixed incorrect conversion from STEP to Parasolid

    • SDHE-18024: Fixed missing Linked Item in CATIA V5

    • SDHE-18016: Fixed IFC not loading with specific system language settings

    • SDHE-17985: Fixed incorrect geometry upon reading from IFC

    • SDHE-17982: Fixed loading of attributes

    • SDHE-17920: Fixed missing geometry upon reading from JT 10.3 files

    • SDHE-17912: Fixed missing Link to Face on Sheet Metal Part from CATIA

    • SDHE-17793: Fixed crash with Viewer sample upon reading from U3D

    • SDHE-17714: Fixed incorrect cut of elements from IFC import

    • SDHE-17586: Fixed typo in A3DTopoFaceData documentation

    • SDHE-17571: Fixed crash upon calling A3DRiRepresentationItemComputeTessellation on macOS

    • SDHE-17376: Fixed SolidWorks file PMI viewing off

    • SDHE-13090: Fixed missing hole in IFC’s IFCSHAPEREPRESENTATION

    • SDHE-12414: Fixed IFC classification attributes reading

    • SDHE-12396: Fixed incorrect STEP loading

    • SDHE-12357: Fixed STEP AP242 not supporting material

    • SDHE-12098: Fixed handling of boolean in some IFC models

  • HE 2021 SP1 U1

    • SDHE-18319: Fixed incorrect visibility in Revit Design Option

    • SDHE-17994: Fixed unread properties in some Solidworks parts

    • SDHE-17972: Fixed incorrect distance information in 3D PDF measurement properties

    • SDHE-17444: Fixed reading of IFCGRIDAXIS AxisTag property in IFC

  • HE 2021 SP1

    • SDHE-18288: Fixed incorrect unit in DWF model import

    • SDHE-18285: Fixed incorrect import of IPT extension

    • SDHE-18245: Fixed import failing on SolidWorks models

    • SDHE-18227: Fixed crash upon using A3DAsmModelFileTranslateToPkParts on Rhino model

    • SDHE-18212: Fixed crash upon using A3DAsmModelFileTranslateToPkParts on Rhino model

    • SDHE-18161: Fixed crash upon calling A3DAsmModelFileTranslationToPkParts on Rhino model

    • SDHE-18160: Fixed crash upon calling A3DAsmModelFileTranslationToPkParts on Rhino model

    • SDHE-18068: Fixed error upon reading from Creo

    • SDHE-18053: Fixed error upon reading from SolidWorks

    • SDHE-18015: Fixed incorrect unit upon reading from DWG

    • SDHE-17864: Fixed crash when loading some IFC files

    • SDHE-17824: Fixed missing solid body name in Inventor part files

    • SDHE-17803: Fixed missing metadata from STEP AP242 file

    • SDHE-17444: Fixed reading of IFCGRIDAXIS AxisTag property in IFC

    • SDHE-16172: Fixed length of Leaderline in PROSTEP

    • SDHE-12820: Fixed missing hold and thread data from Creo file

    • SDHE-12805: Fixed missing hole from Creo file

    • SDHE-12663: Fixed incorrect reading of CATProduct

    • SDHE-12259: Fixed incorrect hole and thread feature data from Creo file

    • SDHE-12185: Fixed crash upon exporting from Rhino to Parasolid

  • HE 2021 U1

    • SDHE-17924: Fixed crashed upon reading some DWG files

    • SDHE-17889: Fixed incorrect UV coordinates within Revit importer

    • SDHE-17679: Fixed file model not loaded upon reading some Solid Edge files

    • SDHE-17567: Fixed missing version details upon calling A3DGetFileInformation on some formats

    • SDHE-17559: Fixed with relative placement of notes in CATIA

    • SDHE-17455: Fixed bad encoding in Parasolid attribute (SDL/TYSA_UNAME)

    • SDHE-14622: Fixed various visibility issues within Catia V5 captures

    • SDHE-14622: Fixed missing geometries from Creo

    • SDHE-12549: Fixed incorrect loading of some STEP242 files

    • SDHE-12091: Fixed alteration of mode file structure upon reading specific JT files

    • SDHE-12053: Fixed error upon reading from some ProE files

  • HE 2021

    • SDHE-17929: Fixed invalid Creo file not read since HE 2020 SP2

    • SDHE-17900: “Fixed CV5 not loaded correctly with “”Read Feature”” option”

    • SDHE-17899: Fixed bad quality of CV5 import in B-Rep and Tessellation

    • SDHE-17894: Fixed error upon opening some SOLIDWORKS files

    • SDHE-17860: “Fixed incorrect import of SAT file when the first string of attribute is “”%”””

    • SDHE-17842: Fixed textures not read in FBX materials

    • SDHE-17815: Fixed error upon reading some STEP files

    • SDHE-17801: Fixed missing attributes within NX file

    • SDHE-17800: “Fixed crash upon reading CatiaV5 files with “”Feature Tree”” set”

    • SDHE-17600: Fixed missing link to body from CATIA

    • SDHE-17597: “Fixed incorrect loading of Catia V5 files when “”Read Feature”” is set”

    • SDHE-17569: Fixed duplication of faces with CREO assembly features

    • SDHE-17409: Fixed missing colors in FBX

    • SDHE-17407: Fixed error upon reading from Catia V5

    • SDHE-17347: Fixed missing external reference within CATPart components

    • SDHE-17338: Fixed incorrect import of some curve styles in Catia V5

    • SDHE-14450: Fixed missing extrusions upon importing from IFC

    • SDHE-13749: Fixed missing PMI from Creo view

    • SDHE-12433: Fixed missing GD&T symbols upon reading from Catia V5

    • SDHE-12278: Fixed error upon reading binary FBX files

    • SDHE-12164: Fixed error upon reading from some ACIS files

    • SDHE-12160: Fixed an error upon loading from some ACIS files

    • SDHE-12113: Fixed Copy-and-Adapt failing with some Inventor files

    • SDHE-12065: Fixed incorrect unit upon exporting from Inventor

    • SDHE-12038: Improved performances upon loading from DWG

  • HE 2020 SP2 U2

    • SDHE-17602: Fixed bad quality of some objects in BRep mode

    • SDHE-17565: Fixed support for paths longer than 270 characters on non-Windows platforms

    • SDHE-17557: Fixed a crash happening upon exporting some files to STEP

    • SDHE-17511: Fixed incorrect size upon converting some faces to NURBS

    • SDHE-17507: Fixed a crash on PRT files upon calling Adapt-And-Replace function

    • SDHE-17505: Fixed incorrect or missing faces upon converting from CATIA V5

    • SDHE-17504: Fixed shrinked NURBS faces upon converting complex faces from CATIA V5

    • SDHE-17502: Fixed shrinked NURBS and errors upon converting complex faces from CATIA V5

    • SDHE-17478: Fixed quality issues upon reading CATIA V5 files

    • SDHE-17410: Fixed Shrinked NURBS surfaces upon converting from CATIA V5

    • SDHE-17399: Fixed quality issues upon reading from CATIA V5

    • SDHE-17396: Fixed shrinked faces upon converting to NURBS from CATIA V5

    • SDHE-17378: Fixed missing metadata from STEP AP242 files

    • SDHE-17371: Fixed missing data from imported CATIA V5 files

    • SDHE-17368: Fixed crash upon calling Adapt-and-Replace function on PRT files

    • SDHE-17364: Fixed quality issues upon reading from CATIA V5

    • SDHE-17348: Fixed incorrect surface tessellation upon reading some CATPart files

    • SDHE-17346: Fixed incorrect surfaces upon reading some CATPart files

    • SDHE-17344: Fixed missing ISO Fit information from Creo hole feature

    • SDHE-13587: Fixed missing fit information from Creo hole feature

    • SDHE-12478: Fixed invalid structure of JT export

    • SDHE-12444: Fixed incorrect faces on exported STEP models

    • SDHE-12389: Fixed import error upon loading some IFC files

    • SDHE-12322: Fixed incorrect node names upon reading some IFC files

    • SDHE-12295: Fixed incorrect orientation of faces upon reading STEP files

    • SDHE-12244: Fixed incorrect length of axis when importing from CATIA

    • SDHE-12132: Fixed a crash upon importing a JT file on Linux

    • SDHE-12085: Fixed incorrect import of meshes upon importing into Parasolid

    • SDHE-12081: Fixed incorrect reading of CATIA V5 files

    • SDHE-12064: Fixed missing association with Datum tag in CATIA

    • SDHE-12054: Fixed incorrect surfaces upon importing CATIA V5 files

    • SDHE-11979: Fixed crash upon reading Inventor files

    • 37168: Fixed a crash upon calling A3DAdaptAndReplace

    • 37150: Fixed an issue where CopyAndAdapt ended up with shrinked NURBS in CatiaV5

    • 37143: Fixed an issue where CopyAndAdapt ended up with shrinked NURBS in CatiaV5

    • 37136: Fixed incorrect faces with CatiaV5

    • 37128: Fixed incomplete support of metadata within STEP files

    • 37108: Fixed an issue where CopyAndAdapt ended up with shrinked NURBS in CatiaV5

    • 37075: Fixed empty surfaces upon reading CatiaV5 files

    • 36960: Fixed incorrect tessellation data upon reading CatiaV5 parts

    • 36914: Fixed reading of Inventor assembly file

    • 36904: Fixed incorrect tessellation data upon reading CatiaV5 parts

    • 36745: Fixed reading of Inventor assembly file

    • 36684: Fixed a conversion error with SOLIDWORKS assembly files

    • 36529: Fixed incorrect surfaces upon reading CatiaV5 files

    • 36515: Fixed missing association with CATIA datum tag

    • 36462: Fixed incorrect reading of CatiaV5 file

    • 36452: Fixed mesh support in SOLIDWORKS 2020

    • 36341: Fixed a crash upon reading a JT file on Linux

    • 36068: Fixed with axis lengths imported from CATIA

    • 35944: Fixed incorrect orientation of faces within STEP files

    • 35879: Fixed incorrect reading of IFC node names

    • 35602: Fixed wrong faces upon reading STEP models

    • 35509: Fixed invalid export of JT structure

    • 32910: Added support for missing information when reading Creo PMI

  • HE 2020 SP2 U1

    • 37070: Removed duplicate symbols in iOS binaries

    • 36920: Fixed JT to SAT conversion failing with GNU/Linux

    • 36861: Fixed an issue with attributes reading for Revit reader

    • 36848: Fixed missing attibutes when reading some DWF files

    • 36597: Fixed missing weld symbols upon reading some CV5 files

    • 36588: Add support for IfcRevolvedAreaSolid upon reading IFC files

    • 36507: Fixed syntax error with tolerance values within exported STEP files

    • 36465: Fixed syntax error with exported STEP files with unattached annotations

    • 36335: Fixed missing read density upon reading Solid Edge files

    • 36049: Fix Time value of User Define Attribute with NX

    • 35711: Fixed a crash occurring when reading some IFC files

    • 35311: Fixed missing bend surfaces upon loading IFC files

    • 34641: Fixed missing parts upon loading IFC files

    • 32813: Fixed incorrect orientation of PMIs with CATIA V5

    • 31324: Fixed wrong sectioning of some model file with A3DComputeOrthoHLROnModelFile

  • HE 2020 SP2

    • 37038: Creo stability improvements

    • 36948: Parasolid stability improvements

    • 36795: CREO: Support assembly level features

    • 36755: Improvement of FBX reader to support version 7500 in binary

    • 36702: Fixed vulnerability with BIBUtils

    • 36680: Fixed issue with Creo colors that were wrongly recovered

    • 36639: SolidWorks import stability improvements

    • 36592: FBX reading improvements

    • 36542: Catia V5 reader stability improvements

    • 36510: Fixed regression of A3DComputeOrthoHLROnModelFile3 API

    • 36502: Parasolid reader stability improvements

    • 36488: Catia V4 reader stability improvements

    • 36466: Creo feature improvements for holes and threads

    • 36442: Fixed reading error for DXF file

    • 36431: Fixed reading error for DWG file

    • 36356: Creo feature improvements for holes and threads

    • 36347: Fixed issue with Creo color intensity support

    • 36336: Solid Edge reader improvements for assemblies

    • 36232: Fixed issue for Creo color intensity support

    • 36158: Fixed reading error for a STEP file

    • 36120: Missing attributes in Creo

    • 36050: NX reader: Support of User Define Attributes

    • 36048: NX reader: Support of User Define Attributes

    • 36046: NX reading improvements

    • 36026: Creo feature improvements with holes and threads

    • 36024: VDA reading stability improvements

    • 35970: Fixed geometric error for Catia V5 reader

    • 35933: Creo feature improvements for holes and threads

    • 35916: Creo feature improvements for holes and threads

    • 35887: IGES reading stability improvements

    • 35747: IGES reading stability improvements

    • 35688: Fixed geometric error for NX reader

    • 35655: Inventor reading improvements

    • 35561: IFC reader improvements

    • 35355: Changed accuracy in PRC2XML sample where float values where casted to integers

    • 35200: Fixed geometric error for NX reader

    • 35184: Fix incomplete data for annotation PMI for SolidWorks reader

    • 35100: Fixed aa error for A3DComputeOrthoHLROnModelFile3 function

    • 35044: Improvement of Creo color intensity support

    • 34652: Fixed an issue for the model comparison function

    • 34564: Fixed an issue for attributes access in NX reader

    • 34277: Fixed an issue when reading a PRC file

    • 34256: Support of Creo assembly features as BREP

    • 33593: Support of Creo assembly features as BREP

    • 33592: Support of Creo assembly features as BREP

    • 33591: Support of Creo assembly features as BREP

    • 33501: Support of Creo assembly features as BREP

    • 33379: Fixed issue for FBX reader

    • 33205: NX user defined attributes support

    • 33136: Fixed a documentation issue about supported formats

    • 32611: Fixed a documentation issue about the Linked item information

    • 32017: Support of Creo assembly features as BREP

    • 31535: Support of Creo assembly features as BREP

    • 31500: Fixed an issue with u177 RTF code not correctly retrieve on Linux for markup definition

    • 31412: Support of Creo assembly features as BREP

    • 30940: Improvement of axis dimensions

    • 28880: Support of Creo assembly features as BREP

    • 28869: Support of Creo assembly features as BREP

    • 26493: Creo boolean operation B-rep support

    • 24060: Support of Creo assembly features as BREP

  • HE 2020 SP1 U1

    • 36508: Fixed incompatibility issue with Linux

    • 36226: Fixed error upon loading top assembly only NX files

    • 35845: Fixed A3DAsmGetFilesPathFromFile wrongly reporting no missing files with JT

    • 35184: Fixed incomplete data for annotation PMI with SolidWorks

  • HE 2020 SP1

    • 36344: Fixed missing geometry reference for Creo

    • 36178: Removed an unwanted exception on Windows upon importing Revit files

    • 35902: Fixed A3D_COEDGE_BAD_ORIENTATION_DATA error upon calling A3DCopyAndAdaptBref on some NX Files

    • 35710: Removed unexpected duplication of family geometries with Revit

    • 35659: Fixed data loss with TranslateToPkParts upon reading convergent model data on Linux

    • 35610: Fixed missing curved upon calling CopyAndAdapt on some Parasolid files

    • 35588: Fixed missing curved upon calling CopyAndAdapt on some NX files

    • 35445: Fixed huge delay upon reading metadata with Revit files

    • 35345: Fixed blank display within HE Demo on some Inventor files

    • 35197: Fixed parsing error upon reading some SolidEdge file

    • 35100: Fixed a crash with A3DComputeOrthoHLROnModelFile3 function

    • 34542: Fixed crash upon conveting Revit to HSF

    • 34176: Fixed order of configurations tree with SolidWorks

    • 34175: Fixed incorrect Alphabetic (Literal) order of configurations tree with SolidWorks

    • 33668: Fixed incorrect PMI positions (GDT and Datum) with Creo

    • 33257: Fixed incorrect assembly feature organization with Solid Edge files

    • 32163: Fixed tessellation errors with Inventor reader

    • 29994: Fixed unexpected conversion of control characters upon reading PTC 4.0 files

  • HE 2020 U1

    • 35846: Fixed a parsing error when reading a SolidWorks file

    • 35731: Upgraded FreeType dependency for vulnerability purpose

    • 35606: Fixed a regression with missing UV Curves when calling CopyAndAdapt on NX files

    • 35514: Fixed failing conversion of some surfaces when calling CopyAndAdapt on Creo files

    • 35433: Fixed missing Handle and Type attribute data when reading a Revit file

    • 35408: Fixed wrong names attributed to Part and Assemblies when reading STEP files

    • 35354: Added Handlers as persistent ID’s on Revit entities

    • 35309: Fixed a regression with missing UV Curves when calling CopyAndAdapt on NX files

    • 34643: Fixed wrong curves when converting a cylinder in SolidWorks files

    • 34587: Fixed wrong curves when converting a sphere in NX files

    • 34050: Fixed a case where a PMI semantic link was lost when reading a Creo file

    • 34038: Fixed a case where a PMI semantic link was lost when reading a Creo file

  • HE 2020

    • 26946: PMI: Projected tolerance zone not detected for second tolerance in composite control frame

    • 30849: Failure in the multi-process Parasolid export with several files – Part II

    • 33240: NX Import Crash

    • 33579: Datum target orientation wrongly recovered

    • 33619: Problem in revolution surface conversion from IGES

    • 33670: Progress reporting inconsistent

    • 33875: Split torus not working

    • 33876: Split cylinder fails

    • 33877: Split torus fails

    • 33984: NX version 1872.900 not supported by HOOPS translator.

    • 34010: Hole fit informations from SolidWorks file

    • 34057: Wrong revolution splitting

    • 34058: Missing UV curves from SLW file

    • 34238: Wrong closed NURBS splitting

    • 34454: Wrong circular pattern spacing

    • 34520: Missing status flag in pattern data

    • 34523: Missing limit face data in NX Symbolic Thread

    • 34541: 3DXML with 22+ structure levels does not load #4435

    • 34609: Missing Cosmetic thread data

    • 34618: Wrong Hole Direction from CatiaV5 file

    • 34628: Cannot load inventor file

    • 34642: Wrong revolution face conversion from SLW

    • 34706: Missing UV curves from Parasolid file

    • 34716: Wrong UV curve on a cone from Inventor

    • 34717: Wrong UV curve on a sphere from NX

    • 34722: Regression CopyAndAdapt does not work with NX model

    • 34742: Datums not recognized in Catia V5 (.CATPart) file

    • 34747: Not precise CopyAndAdapt of offset face in CV5

    • 34791: Split of revolution face does not work. SLW file

    • 34806: GSMRotate feature by two elements not implemented

    • 34829: can we get access to the entity name in .model files?

    • 34832: Case #36963 : Support NX 1872 version

    • 34888: Case #37302 : Not reading Inventor 2020 assemblies with PMIs

    • 35012: Case #37086 : STEP export crash

    • 35082: Attached SAB file does not load

    • 35099: Attached SAT file does not load

    • 35145: Converter Crash on CATPart conversion

    • 35307: Feature pattern unequal spacing wrong steps. Regression.

    • 35361: Cannot import a iam file

  • HE 2019 SP2 U2

    • 34430: Fixed reading which created empty scenes with OBJ files

    • 34672: Improved the subdivision in surface approximation which led to a huge number of control points with A3DCopyAndAdapt functions

    • 34681: Fixed a regression introduced in A3DAdaptAndReplace with extremely small edges

    • 34800: Added missing support for helical curves

    • 33990: Added an option to support lines types with OBJ export

    • 34072: SolidWorks reader does not process all configurations

    • 34213: Slow performances on Solidworks reading in B-rep mode

    • 34238: Improve CopyAndAdapt conversions when m_bSplitClosedFaces is enabled

    • 34527: OBJ export doesn’t take ModelFile Unit into account

    • 34694: Exporting to PRC containing a real type generic attribute causes crash

    • 34887: Exporting to PRC containing a real type generic attribute causes crash

    • 34695: Fixed missing faces when reading Catia V5 files.

    • 34784: Getting Node Data from a PMI node always returns empty attributes.

    • 33563: Improving profile tolerance for PROE files

    • 33566: Dual-Dimension not converted correctly

    • 33669: Indication missing in PMIs in converted Creo 4.0 part

    • 34177: Change the behavior of the SolidWorks configurations repair when enabling the m_bLoadAllConfigsData option

    • 34719: A3DPDFGetBOMInfo returns 0 elements in iNumberOfElements

  • HE 2019 SP2

    • 31898: Fixed sub-assembly not loaded because of files with same CLSIDs and because of a CLSID not found in the sub-assembly file

    • 33259: CV5 import fails

    • 31825: Inventor assembly incorrectly displayed

    • 30369: Transformation Problem with Inventor Data

    • 33610: PS to STEP incorrect

    • 33893: Load wrong for SolidWorks configurations

    • 33588: CREO : PMI Color issue

    • 31529: Bridge is losing the CATPart color

    • 33859: Wrong curves color from Creo file

    • 33981: Parasolid export performance improvements

    • 33438: Import NX wrong scaling

    • 33489: Linked curves when reading a .stp file

    • 33578: Text color not correctly converted on Creo file

    • 33649: Wrong error code returned

    • 32481: Very bad STEP import, bad trimmed torus

    • 31747: Support of Inventor Positions

    • 29480: Inventor reading improvements

    • 31950: CATIA tessellation issue with features

    • 31609: Matrix feature is missing faces

    • 33934: Missing linked items for dimensions in semantic PMI

    • 24936: (NIST) Missing references from datums to geometric tolerances

    • 33546: Reading of a wrong part in Catia assembly tree

    • 33547: Reading of a wrong part in Catia assembly tree

    • 33727: Reading of a wrong part in Catia assembly tree

    • 34115: Crash when opening a custom PRC

    • 34638: Fix error in Makefile

    • 30034: Inventor parts loaded in BRep, not in Tess mode

    • 34563: OBJ Files not Importing

    • 33655: NX reading improvements with Parasolid geometry

    • 34490: Large STL files reading improvements

    • 34321: Large STL files reading improvements

    • 34477: Crash on accurate tessellation

  • HE 2019 SP1 U1

    • 32910: ProE features

    • 34073: Missing PMI in SLW

    • 34298: Infinite import

    • 33785: ACIS read

    • 34206: JT 10.3 read

    • 34204: JT 10.3 read

    • 34185: JT 10.3 read

  • HE 2019 SP1

    • 33969: ACIS reading improvements

    • 33933: NX reading improvements

    • 33856: Wrong revolution conversion with AdaptAndReplace

    • 33836: Incorrect Parasolid conversion

    • 33816: DeepCopy error

    • 33790: Converting SLDPRT file results in empty scene

    • 33788: TranslateToPkParts returns A3D_ERROR in multi process

    • 33786: Import file raises access violation exception

    • 33780: FBX export Unicode support

    • 33751: TranslateToPkParts: STL units conversion fix

    • 33702: NX assembly does not convert

    • 33700: Solidworks file not displayed

    • 33689: DeepCopy and PMI

    • 33676: Improving of TranslateToPkParts in multi-proc

    • 33636: Missing CATDrawing text data in Viewer sample

    • 33626: reading normal data in IFC file

    • 33611: Question about support of 3DXML BRep

    • 33552: The cascaded attributes do not handle face color entity reference

    • 33551: Memory release improved

    • 33542: JT file not loaded

    • 33531: A3DMDFCFRowDatumData doesn’t return correct m_eModifier as saved in Step242 File

    • 33521: STEP file does not open

    • 33494: Glb files with specific primitives were not converted

    • 33492: STEP reading improvements

    • 33466: Conversion of a NX assembly file failed

    • 33450: DWG missing 3D geometry

    • 33425: Doc face indexes

    • 33390: bad_cast exceptions

    • 33349: Inventor reading improvements

    • 33348: Inventor part blank display in BREP

    • 33315: Revit read

    • 33314: Revit read

    • 33313: Revit read

    • 33267: Standard Tessellation improvement

    • 33241: Unexpected buffer value in IGES header when coming from a parasolid session

    • 33238: IFC file didn’t open in previous version

    • 33218: Can’t read NX file with feature

    • 33209: A3DComputeModelFilePhysicalProperties fails

    • 33177: Correct recovery of helix curve trim in BRep mode conversion

    • 33164: Runtime error when computing physical properties

    • 33118: Bad accurate tessellation

    • 33117: Accurate tessellation improvements

    • 33114: Bad accurate tessellation SLW

    • 33111: Bad accurate tessellation

    • 33109: Bad accurate tessellation

    • 33086: #3700 Issues with GLTF files - no transparency

    • 33042: Can’t read file with features.

    • 33006: ACIS export improvements

    • 33005: ACIS export improvements

    • 32987: Color information is lost when the representation item is converted into an ACIS buffer

    • 32961: Compute UV curves of periodic faces improvement

    • 32937: Color assignment problem colors ignored

    • 32905: ACIS R25.0 file fails to read

    • 32899: Cannot import revit file with access violation exception

    • 32843: Sphere lost their face name during STP conversion

    • 32778: A3DAsmModelFileSew crashes when options initialized but not set

    • 32723: Pattern master is missing from the pattern definition

    • 32486: CV5 reader is missing some info for the feature to be correctly defined.

    • 32392: No material name

    • 32207: missing cross highlight and semantic for DATUM_FEATURE connected with a complex SHAPE_ASPECT

    • 32140: JT Export: Bad handling of units decimeter, centimeter and micrometer

    • 31953: Some vertices were wrongly recovered

    • 31743: Catia Semantic PMIs Modifiers

    • 30211: Crash on Win32 when loading PDF files

    • 29618: Inventor Linux UTF-8 improvements

    • 28827: Cannot load PDF file

    • 28746: SW files with Virtual components produced sometimes unexpected results

    • 28741: SolidWorks Virtual Component Empty configuration when m_bLoadAllConfigsData is set to true

    • 28412: Solidworks configuration issue

    • 26654: NX Misplaced PMI

    • 25903: Accurate tessellation improvements

    • 24948: A3DAsmGetFilesPathFromModelFile exception abort with surrogate pair

    • 24528: Wireframe and nodes are located far away from the IFC 3D model

    • 23060: Linestyle or point style is incorrect

    • 21036: Accurate tessellation improvements

    • 34047: Solidworks file not imported correctly

  • HE 2019 U1

    • 33557: SolidWorks reading improvements

    • 33545: SolidWorks reading improvements

    • 33525: API: Add missing symbols

    • 33515: Hoops Exchange 2019 JT export is not readable in Solid Edge and Inventor

    • 33374: Loop Added at Apex of cone

    • 33370: A3DProjectPointCloudManagerCreateFromModelFile fails

    • 33356: SolidWorks reading improvements

    • 33310: Semantic pmi creation issue

    • 33288: A3DMarkupGDTData below, before, after and above fields were not correctly set at creation

    • 33138: Accurate tessellation stability improvements

    • 33075: Hoops Exchange 2019 JT export is not readable in Solid Edge and Inventor

    • 32889: No linked item associated to the PMI

    • 32387: Hidden objects are imported even when toggled off

    • 30590: STEP - Add support of NURBS with negative weight

    • 33567: SolidWorks reading improvements

  • HE 2019

    • 33190: Wrong unit for hole diameter value

    • 33189: failed to read tappered hole

    • 33187: COLLADA file opens empty

    • 33141: Accurrate tess issue

    • 33113: Bad accurate tessellation

    • 33110: Bad accurate tessellation

    • 33008: ACIS import and export improvements

    • 33007: ACIS reading improvements

    • 32997: Problem with converting .rvt file

    • 32980: Accurate tessellation improvements

    • 32941: Revit file supported in HE2019

    • 32936: Documentation fix

    • 32898: Revit improvements

    • 32887: Revit improvements

    • 32874: Position for hole is on the hole border instead of the hole center.

    • 32842: A3DAsmProductOccurrenceDeepCopy crashes with root PO of Creo models

    • 32841: JT: Reader improvements

    • 32836: Bug in HE collision example

    • 32770: SolidWorks: Reader improvements

    • 32761: Additional body

    • 32759: Datum has no linked references on this NX file

    • 32755: The recovery of PMIs prevents the conversion of this CV5 file.

    • 32745: Incorrect sup and inf tolerance values

    • 32729: Unit/Scale with JT import: bad measuring in HDV

    • 32725: DeepCopy stability improvements

    • 32701: Incorrect unit format in step export

    • 32691: Copy&Adapt improvements

    • 32690: Export STEP242: wrong face highlight

    • 32679: Converison of this NX file doesn’t work.

    • 32675: The layer names of an OGES were not correctly recovered

    • 32671: Markup: undocumented Index for reference

    • 32656: NX Feature imporvements

    • 32648: NX: Correction of inferior tolerances values

    • 32575: A Creo files conversion failed

    • 32539: NX Views import problem

    • 32532: The conversion of this NX12 file failed.

    • 32531: Measurements on DWF and DWFx files don not match AutoCAD viewer’s

    • 32527: NX View name changes

    • 32524: C&A improvements with the KPE mode

    • 32522: STEP: Reader improvement

    • 32471: feature issue: no connection for the pattern master and a second direction that shouldn’t be given.

    • 32461: A3DAsmProductOccurrenceDeepCopy const correctness fix

    • 32455: curves outside the surface domain after using ConvertToNurbs

    • 32440: Tessellation chord height defined by ratio leads to corsed tess for model with big dimension

    • 32438: Conversion introduces extra geometry

    • 32436: Addition of new setting IncludeHiddenRIs for the PhysProps computation

    • 32407: JT: Better display

    • 32347: Parasolid files do not open

    • 32338: Deep copy improvements

    • 32332: Exported STEP242: Improvements

    • 32289: Missing semantic information while importing step 242 file

    • 32255: two byte input filename corrupted in DWG import

    • 32251: PhysicalProperties are wrong on this Inventor file

    • 32223: Accurate tessellation improvements

    • 32209: STEP: Reader improvement

    • 32189: export groups of attributes to Step

    • 32187: Some COLLADA files were wrongly converted

    • 32186: Some COLLADA files can’t be opened on our side.

    • 32175: infinite loop in stl reader if endsolid line isn’t present

    • 32157: Regression importing a model with HE 11.1.10

    • 32155: Regression importing a model with HE 11.1.10

    • 32111: BRep adaptor take an infinite time

    • 32079: Views missing in SLDPRT file

    • 32063: Step export missing face.

    • 32053: Const correctness API isn’t respected…. Confusing API and reducing user experience.

    • 32035: cpp API : ProductOccurrenceArray resize corrupts memory

    • 32016: Step export error on 2 faces.

    • 32012: STEP file hangs endlessly in A3DAdaptAndReplaceAllBrepInModelFileAdvanced

    • 32010: Error reading an inventor part file in brep mode

    • 31988: OBJ file import problem

    • 31977: An angular dimension got a support line too long.

    • 31922: SolidEdge import skip empty properties

    • 31897: After a conversion of an IFC file, some parts of the model were at wrong positions.

    • 31885: Crash at U3D Export.

    • 31866: “Up To Next” feature hole are imported as “Blind” one

    • 31862: Markups linked by position should be effectively linked

    • 31832: Step export, tessellation issue are degrading after step export

    • 31831: Step export, tessellation issue

    • 31763: Cannot get file path name of PO

    • 31755: SolidEdge: Filepath return by the API

    • 31744: A3DSurfNurbsCreate returns A3D_SRF_CANNOT_CREATE_CANONICAL

    • 31713: Missing faces in ACIS model imported

    • 31610: Wrong cross highlight in NX assembly

    • 31600: Incorrect SAB with wireframe conversion to Parasolid X_T

    • 31499: Parasolid export improvements

    • 31497: Iterative tess improvements

    • 31496: IGES tessellation improvements

    • 31323: REGRESSION: IGES

    • 31029: Unvisible PMIs

    • 30970: A3DMiscReferenceOnTopologyCreate should return error when called with invalid data

    • 30464: Parasolid import improvements with UTF-8 data

    • 30398: Can’t read PDF from Solidworks

    • 30300: Missing patch references in Creo file

    • 30274: SolidWorks import not possible

    • 29784: CATIAV5 linked items

    • 28626: IFC 4 Missing geometry

    • 28343: Issue in BRep mode import for Inventor files

    • 28290: Incorrect surface in STEP file

    • 28278: Recovery of this Inventor assy was not possible

    • 28030: Issue in Tess mode recovery for Inventor files

    • 28021: JT: Model tree changes

    • 27663: views are wrong in JT file if attributes are not imported

    • 27659: Some elements were shifted in 3DPDF Creation - Rhino format

    • 27255: CV5 material attributes improvements

    • 27218: IGES tessellation improvements

    • 27061: N/A

    • 26898: OBJ textured file with material correctly support in Tetra4D Converter 2019

    • 25924: JT: Visibily in view changes when ReadAttributes=false

    • 25655: The BRep conversion of thsi CV5 file is now supported

    • 25608: NX parsing issue fix

    • 25198: JT Export - loss of a lot of tessellated faces information

    • 25111: Wrong visibility of items in views

    • 22936: U3D can’t be imported

    • 22900: PMIs support for 3DXML file

    • 33239: Bad spherical geometry translation

  • HE 2018 SP2 U2

    • 32654: Wrong Counter Bore diameter and depth values

    • 32638: Semantic PMI in mm instead of inch

    • 32507: Missing info for thread from NX…

    • 32493: Failure on reading SLDASM in Brep mode

    • 32479: A3DTopoEdgeGetSurfaces() crashes

    • 32473: feature issue: a second direction that shouldn’t be given.

    • 32465: Bug

    • 32426: Hoops Exchange does not identify proper Clearance or Collision result

    • 32422: Wrong hole direction from Creo file (M12)

    • 32408: Imprecise data in Creo hole feature

    • 32386: IGES - Tessellation deleted by sewing after loading with TessOnly

    • 32385: Missing curves from IGES file

    • 32380: Empty modell when loading XML

    • 32361: Collision isn’t detected

    • 32304: Issue with Accurate tessellation on this STP file conversion

    • 32252: Accurate Tessalation was wrongly recovered on this STL export

    • 32211: Bad unit of a tolerance value from STEP file

    • 32206: The unit in some DWG files was not correctly recovered

    • 32011: Inventor file conversion is Hanging

    • 32009: Inventor file takes more than 1 hour to be read

    • 31547: Add/Implement support of additional search directories for XML files

    • 32655: Wrong hole diameter in Creo model

  • HE 2018 SP2 U1

    • 32328: N/A

    • 32274: Sample viewer doesn’t draw PMIs text

    • 32229: Volumetric Physical Properties Not Computed

    • 32170: Sew process on this IGES file failed

    • 32161: SolidEdge test model is translated to Parasolid with several problems

    • 32121: Some Attributes were missign at the STP AP242 export

    • 32077: Compute Physical Properties Differences

    • 31965: Conversion of an 3DXML file failed

    • 31906: Long STL conversion time

    • 31505: DWG 3D: Extra lines

    • 29863: PMIs are broken in JT file

    • 28338: Inventor -> IGES improvements

    • 25066: JT PMI-references incorrect

    • 32856: A3DcollisionCompute crash

  • HE 2018 SP2

    • 31964: Crash reading PMI in HOOPS 2018 SP2 Preview

    • 31948: Importing a Creo file with Features loses colors

    • 31895: Moment of inertia wrong results.

    • 31878: Accurate tessellation improvements

    • 31865: Solidworks new objects parsing support

    • 31828: DWG file isn’t displayable

    • 31827: Text not converted in autocad files

    • 31766: IFC single-quote character support

    • 31759: SolidEdge: model display

    • 31753: C++ API RI::PointSet creation fails

    • 31666: Memory issue in the C++ API

    • 31664: Memory issue with RepresentationItem in C++ API

    • 31659: Autodesk SAT files support added

    • 31652: DWG conversion consumes too much memory

    • 31644: Missin colors Rhino file.

    • 31635: C++ API LayerEntity.IsEmpty() value

    • 31623: JT can’t be loaded in BREP mode

    • 31612: Regression : colors are lost when exporting NX file to IGES

    • 31525: ACIS reading improvements

    • 31524: Error when building TranslateToPkParts sample on Mac

    • 31509: Regression SLW: Missing bodies

    • 31506: NX Feature: Crashes on Linux

    • 31504: Regression Sew: Two items instead of one

    • 31501: Feature: Cannot read back PRC on Linux

    • 31498: Regression: bad placement of tess in wxt WriteTess

    • 31492: ACIS reading improvements

    • 31472: Acis export error checked

    • 31457: Empty scene after STEP import

    • 31454: JT import random crash

    • 31438: Exporting a cone to .3MF or .STL, exporter hangs, never finishes

    • 31419: 3DXML: ReadAttributes setting is not working

    • 31407: 3DXML reading improvements

    • 31400: IGES reading improvements

    • 31331: SLW: Empty poster for configuration

    • 31268: Crash if an incorrect entity is provided to A3DTess3DGet

    • 31233: Helix results in non-manifold mesh.

    • 31230: Some PMIs were invisible at view activation

    • 31210: End of a leader pin reference frame was missing

    • 31208: Some PMIs were invisible at view activation

    • 31205: Some PMIs were duplicated at view activation

    • 31204: Some PMIs were duplicated at view activation

    • 31203: Some PMIs were duplicated at view activation

    • 31189: Multithreaded export from SolidWorks model produces invalid result

    • 31163: Missing colors in shells of DFX files

    • 31130: PAR-324: Calls to A3DRWParamsTranslateToPkPartsData never return for this assembly

    • 31012: Bad color of part in Solid Edge ST10 assemblies

    • 30984: A3DCopyAndAdaptBrepModelAdvanced return A3D_TOOLS_SPLIT_FAILURE

    • 30979: crash when data are intialized but not set.

    • 30975: A3DAsmModelFileData::m_eModellerType is Unknown for DWG files

    • 30866: Inventor issue

    • 30855: JT PMI text was scrambled on a specific file

    • 30474: Support sections visualisation in final package Sample Viewer

    • 30354: SolidEdge - Strange attributes in .par file

    • 30329: Solidworks assembly missing bodies

    • 30010: DWG: Cannot load files / A3D_EXCEPTION in x32

    • 29853: DATASET_DATE_RELEASED attributes not correct

    • 29785: PMI texts were missing in conversion result

    • 29504: IDEAS stability improvements on Linux

    • 29292: IDEAS stability improvements on Linux

    • 29268: Catia PMI are longer than expected

    • 29220: Texts are missing in DWG file read with ReadDrawings=false

    • 28359: IDEAS stability improvements on Linux

    • 28239: ACIS export improvements

    • 27916: Ideas: Cannot load file on Linux x64

    • 27913: Reading files exported in Iges: A few color issues

    • 27889: Regression Iges - Wrong color

    • 27281: visibility isn’t correct when reading construction entity

    • 26817: PRC Export with BREP compression crashes

    • 26284: PMI vertices were not load in a specific JT file

    • 25727: IDEAS files fail on Linux

    • 24464: PAR-257 Surface Problem - Extra Surface (SLW)

    • 31974: Missing coordinate systems with deep copy

  • HE 2018 SP1 U1

    • 31790: Issue in specific CV5R28 file conversion

    • 31661: Removal of the MP mode with wxt in the TTPP sample

    • 31571: MP wxt is now working on Linux

    • 31567: A3DAsmProductOccurrenceEdit stability improvements

    • 31536: CV5-6 R2018 reading improvements

    • 31495: Incremental load improvements with NX files

    • 31491: MP wxt is now working on Linux

    • 31465: CATIA V5 files open empty

    • 31459: Fail to read some SolidWorks files

    • 31445: Parasolid file does not open in all machines

    • 31439: Exporting a cone to ACIS (.SAT or .SAB) throws an exception inside the A3D export call

    • 31382: Crash while rereading Parasolid entities

    • 31352: ProE Thread pitch value appears incorrect

    • 31274: Crash while rereading Parasolid entities

    • 31196: Problem with import of CATIAV5 tesselation

    • 31100: Geometric tolerances from Creo 4 missing

    • 31094: GD&T tolerances missing from Creo4 file

    • 30044: SolidWorks regressions: bad default views when comparing the posters

    • 30014: JT: Duplicated PMI references

    • 29940: Creo GD&T Gp0 missing at import

    • 29701: incorrect geometry

    • 26741: STEP: A3DAdaptAndReplaceAllBrepInModelFile returns A3D_LOOP_BAD_ORIENTATION_DATA

    • 31921: BrepAdaptor sample crashes with a particular file

  • HE 2018 SP1

    • 31427: Acis export error

    • 31410: Solidworks assembly crash

    • 31387: NX plane in wrong location

    • 31317: A3DRiRepresentationItemSet() could be used to set only a coordinate system

    • 31273: Crash at Parasolid bridge

    • 31266: 3DXML file seems not loaded correctly

    • 31250: Can’t read XT file

    • 31218: The created PDF files are much bigger than before

    • 31164: Bad import of the color model

    • 31154: Better makefile settings in the samples

    • 31131: Giant datum symbol

    • 31126: References for Creo4 driving dimensions missing

    • 31125: Meta data missing from ifc file

    • 31045: STL file is not readable

    • 31040: Regression Export U3D

    • 31039: Incorrect import of sketchs

    • 31036: A3DTessBase for RiCurve ptr is randomly null

    • 31026: STL export unit issue

    • 31008: ACIS reading improvements

    • 30989: DWG: colors are missing

    • 30976: Invalid DrawingModel data for DWG files

    • 30966: STL export in Inch on Linux

    • 30962: TTPP hangs during conversion

    • 30959: Random value of validation property report

    • 30937: problem with chinese characters

    • 30931: Extra body in NX part

    • 30930: NX planes

    • 30903: X_T BREP reading error

    • 30850: Infinite loop for incorrect STL

    • 30845: problem to open IPT files

    • 30827: 3dxml naming issue

    • 30799: Simple 20 triangle STL file fails to import

    • 30798: Exploded views not correct

    • 30776: Export ACIS: ProE assembly part getting scaled

    • 30759: wrong return

    • 30738: Library Lock in UTF8 Conversion Function Causes Unexpected Error

    • 30718: Long loading time

    • 30712: Parts hidden in assembly explosion

    • 30711: Faulty arrangement of parts in assembly: exploded view is incorrect

    • 30690: Creo File could not be opened

    • 30681: Import .model files fails

    • 30672: SolidWorks - File not correctly imported

    • 30669: Copy&Adapt improvements

    • 30668: Copy&Adapt improvements

    • 30661: Failure when reading DWG files

    • 30658: Samples improvements

    • 30638: STL reading improvements

    • 30621: A3DSurfProjectPoint API memory improvements

    • 30618: Communicator stuck while creating a stream cache for a specific inventor part

    • 30604: JT: Wrong scaling in a file

    • 30560: CV5 shattered mode improvements on Linux

    • 30541: NX Linux stability improvements

    • 30478: A3DAdaptAndReplaceAllBrepInModelFileAdvanced removes entity of type

    • 30460: OLE non-native data not displaying

    • 30435: IFC imprecise tessellation

    • 30386: Error while converting CATIA file - Invalid format

    • 30376: Catia v5 ASM: Import not possible

    • 30367: Chinese text conversion failure in DWG

    • 30336: JT: Chinese characters?

    • 30283: CATDrawing Linux stability improvements

    • 30282: Export STEP and STL: bad geometry

    • 30273: JT files have incorrect scale

    • 30268: Windows sample test script improvements

    • 30233: STL export unit issue on Linux

    • 30230: STEP Export ends up with corrupted tesselation

    • 30084: Missplaced 3D Annotations from Creo

    • 29993: Failed to convert the numbers of the PMIs

    • 29992: The color of the part is not converted.

    • 29985: Wrong character and position of PMI in Creo file

    • 29984: The PMI is not displayed when the view is applied

    • 29959: 3DM conversion problem

    • 29932: Cyrillic characters get lost on import files with Cyrillic names

    • 29887: Some Datums are missing from CATPart

    • 29834: Loading of NX file takes 15 hours

    • 29762: Bad trimmed faces on STEP file

    • 29740: Defective results on JT file

    • 29710: IGES export improvements

    • 29708: MP wxt stability improvements

    • 29644: HDV CAD Tree differs when NX assembly is loaded

    • 29616: Multi-process Linux stability improvements

    • 29609: Error in export to STEP AP242

    • 29525: JT reading improvements

    • 29450: Some faces are splitted after step export

    • 29383: Crash when loading NX file

    • 29336: JT reading improvements

    • 29277: Export PDF: Crashes export file on Linux x64 and x32

    • 29266: Multi-process Parasolid export improvements

    • 29061: Poor tesselation at import

    • 29060: Regression SolidWorks: bad-looking part

    • 29040: Creo PMI improvements

    • 28934: A3DComputeOrthoHLROnModelFile3 fails on sectioning in low LOD

    • 28849: Missing a part in SolidEdge assembly

    • 28801: Creo PMI improvements

    • 28732: SolidWorks parsing improvements

    • 28619: Corrupted step geometry being splitted.

    • 28617: Step Reader issue with surface

    • 28608: SolidWorks Assembly with internal parts => issue with shattered loading

    • 28588: Can’t Read CATDrawing: A3D_LOAD_INVALID_FILE_FORMAT

    • 28395: NX reading improvements

    • 28026: A3DAsmGetFilesPathFromModelFile doesn’t return the saved path of the part

    • 28008: NX9: Filtered items should be hidden by default

    • 27728: IGES model tree improvements

    • 27279: SPR 962607: Part Orientation is changing on opening 3DXML file in Edrawing

    • 26959: Parasolid buffers improvements for NX reading

    • 26943: IGES export surface improvements

    • 25794: Parasolid export improvements

    • 25006: Wrong color display on solidworks file

    • 24778: NX file has extra surface

    • 24624: parsing issue

    • 24110: Fail to load the specific NX large assembly

    • 24056: Filtered solid are loaded even if ReadActiveFilter=true

    • 23821: ReadHiddenObjects=false doesn’t work on this NX file

    • 23433: PPC improvements

    • 31502: ACIS to XT improvements

  • HE 2018 U3

    • 31009: PSBodyShopPath improvements on linux

    • 31002: KeepParsedEntities mode improvements

    • 30972: KeepParsedEntities mode improvements

    • 30904: PAR-319: SolidEdge part failt to convert to PKPart

    • 30729: Creo 4.0 - M030 is not recognized by Exchange

    • 29524: DWG file in Communicator

    • 31031: Bridge process fail, hangs and crash

  • HE 2018 U2

    • 30987: DWG: Missing 3D elements

    • 30943: N/A

    • 30922: Missing geometry when importing DXF file

    • 30916: Bad reading of DXF file with ReadDrawings=0

    • 30831: Dwg incorrect placements

    • 30778: DWG: Fail to read whole data

    • 30485: Display range incorrect in viewer

    • 30484: MText is displayed incorrectly

    • 30459: Raster Image not displaying in Container Object

    • 30457: Text is positioned slightly higher

    • 30456: Text extend beyond boundary

    • 29216: DWG: Missing tolerances

    • 30988: DWG: Missing geometry

  • HE 2018 U1

    • 30761: HOOPS Exchange Demo 2018 - slow to start

    • 30508: SolidWorks part BREP blank display

    • 30404: Solidwork CAD conversion quality regression

    • 30396: Text from drawing are wrong after PRC export

    • 30388: A3DRootBaseSet doesn’t overwrite the m_ppAttributes

    • 30371: JT - one file corrupts another - uninitialized memory as name

    • 30205: Attribute cleaning

    • 29950: Infinite Loop reading Catia

    • 29813: SW incorrect Parts and subassemblies transformation BREP Mode

    • 29275: xport HTML and SCS: Cannot export file on Linux x64

    • 28782: __PRC_RESERVED_ATTRIBUTE_PersistentID attributes are duplicated

    • 27152: File is locked when invalid for HOOPS Exchange on Windows.

    • 30762: HOOPS Exchange Demo 2018 - “Unsupported Operation” displayed

  • HE 2018

    • 30517: Crash on STEP assembly export with long names

    • 30512: Export to STEP creates a garbage file when SetCurves is on

    • 30491: Content of JT files v9.5 are not displayed

    • 30471: Bridge XT crash

    • 30461: Polylines not displaying

    • 30458: Text Inside Blocks and Groups do not display

    • 30436: Hoops Exchange for IOS Parasolid

    • 30431: Brep creation errors

    • 30416: DumpFeatureTree Linux compilation fails

    • 30370: Regression colors have changed in JT asm

    • 30356: Bad SAT export

    • 30343: IGES: Crash during sewing

    • 30335: JT: Cannot load model error

    • 30322: Fixed linking problems on Linux

    • 30281: NX shattered mode improvements

    • 30280: ACIS reading stability improvements

    • 30245: wxt bridge crash

    • 30226: SolidEdgeFile Produces Parsing Error (code 22)

    • 30176: STEP import improvements

    • 30169: Querying RiSet information on Feature Base Entity return error code

    • 30155: NX 8.5 files fail to convert correctly

    • 30151: IFC with wrong colors

    • 30145: A3DProEFamTabOrUseWireAndGeneric bvehavior change

    • 30112: Shattered - When loading a STEP file in shattered mode: Crash

    • 30108: Circular Pattern Missing for PRO/E

    • 30081: JT has tessellation errors

    • 30063: Creo file Crash at A3DAsmModelFileTranslateToPkParts.

    • 30050: CatPart import, huge geometry

    • 30022: UV computation on torus

    • 30012: STL previously generated by HX and re-read by HX: Empty files

    • 30000: NX11 file not read

    • 29998: Samples warning removal

    • 29974: DWG files with unicode characters not read on Linux

    • 29967: STEP: Crash during sewing of a file

    • 29964: healing isn’t fully repair a model as it used to do

    • 29877: Can not load ifc file

    • 29857: CV5 shattered mode improvements on Windows

    • 29800: CV5 PMI improvements

    • 29789: Component tree of IGES file shows wrong names

    • 29773: Parasolid tess Export improvements

    • 29772: Parasolid tess reading improvements

    • 29754: A surface is missing in a SolidWorks file.

    • 29718: A3DRootBaseGet is adding attributes.

    • 29715: Parasolid export improvements

    • 29709: STEP export: wrong material

    • 29702: IFC geometry is wrong

    • 29663: Exchange Export does not keep Parasolid product structure

    • 29624: Error when importing NX

    • 29617: SolidWorks parsing improvements

    • 29614: STEP import improvements

    • 29477: ACIS geometry regression

    • 29448: STEP unit tolerance issue

    • 29396: Material information when defined inside bodies for CV5

    • 29370: 3DXML resource improvements

    • 29360: DWG not read on Linux

    • 29319: A3DRootBaseGet is adding attributes.

    • 29303: Composites are failing for A3DCrvBaseGetAsNurbs()

    • 29293: .hsf file not read on Linux

    • 29286: STEP import improvements

    • 29159: STEP export improvements

    • 29102: “Crash” or “Couldn’t load model file” when testing some DWG files

    • 28990: Parsing error on CatPart

    • 28915: Some DWG files are not loaded

    • 28842: WXT: Regression Rhino issue with placement

    • 28733: Could be related to issue#29506

    • 28674: Incorrect rendering of SolidWorks configuration

    • 28484: SolidWorks parsing improvements

    • 28469: Parasolid export improvements with Rhino files

    • 28251: PMI exported in PRC look different

    • 28112: Wrong color when reading Inventor tesselation.

    • 27971: files open empty

    • 27828: A3DProjectPointCloudManagerCreateFromRI crash with Igs files

    • 27735: N/A

    • 26680: Persistent ID Added features duplicated

    • 26672: Persistent ID Assembly Pattern

    • 26637: CV5 reading improvements

    • 26520: Inventor reading improvements

    • 26510: JT: A3DAdaptAndReplaceAllBrepInModelFile returns A3D_TOOLS_NURBSCONVERT_3D_FAILURE

    • 26354: ACIS export improvements

    • 26218: A3DCompareFacesInBrepModels stuck when tolerance is between 1 and 1.5

    • 25516: A3DAdaptAndReplaceAllBrepInModelFile returns A3D_TOOLS_COMPUTE_UV_FAILURE (IGES)

    • 23181: Inventor multi-part assembly crashes prc2xml

    • 16324: IGES model tree improvements

    • 30625: NX stability improvements

  • HE 2017 SP2 U2

    • 30026: Regression in the product

    • 30013: NX Shattered: Solids should be displayed

    • 30008: Unable to import solidworks assembly

    • 30007: Regression NX: Wrong color

    • 29947: Rhino Wrong unit for feet

    • 29896: JT are open empty

    • 29783: CATIA PMI: Datum Targets are not converted

    • 29775: Sewing performance improvements

    • 29737: Catproduct infinite load

    • 29593: Export improvements regarding UTF-8 strings with STEP

    • 29584: Wrong parasolid exported from a step file

    • 29583: Wrong parasolid exported from a step file

    • 29580: Bad faces with a Step file

    • 29565: Face missing when reading a step file

    • 29564: Face missing when reading a step file

    • 29506: SW hidden and suppressed parts are visible in BREP mode

    • 29270: Can’t read file in Tess only mode

    • 29132: NX Point is represented as two identical items in HDV

    • 29131: NX Model missing Datum Axis in HDV

    • 28638: CV5 PMI improvements

    • 28222: IDEAS stability improvements

    • 28137: Inventor: Wrong/Missing faces

    • 27994: STEP file Twisted Face

    • 27901: NX SHATTERED: Some solids should be hidden

    • 23602: NX tesselation issue fix

    • 30087: NX: Missing ref for FCF

  • HE 2017 SP2 U1

    • 29756: Problems with Hoops Exchange 2017 SP2 and NX PMI

    • 29693: STEP export stability improvements

    • 29615: A3DAsmGetFilesPathFromModelFile is throwing an exception

    • 29537: (NIST) NX: Datums on geometric tolerances incomplete

    • 29269: Font not detected correctly for Catia

    • 29188: Curves in exported HTML are black

    • 29187: Missing faces when exporting a PDF to HTML

    • 29135: Fix of FilePathName API

    • 28705: Export SCS or HTML is not working with these files

    • 30095: N/A

  • HE 2017 SP2

    • 29563: STP produced by HOOPS Exchange not readable in CV5

    • 29520: File format detection improvements

    • 29515: Inventor stability improvements on Linux

    • 29459: Fail to read SolidEdge File

    • 29456: BreakPoint and Heap Corruption with the function A3DComputeFaceArea

    • 29455: Segmentation fault during import of a STEP model

    • 29437: Crash at import

    • 29414: Potential buffer overrun

    • 29398: Can’t open SolidWorks file

    • 29394: Unable to import SolidEdge file.

    • 29363: One Solid Edge file not read on Linux64

    • 29348: Copy&Adapt improvements

    • 29335: Unable to load Parasolid file with sample PRC2XML on IOS

    • 29296: .stp.Z file not read on Linux32, but read on linux64

    • 29247: SolidWorks stability improvements

    • 29233: I-DEAS reading improvements

    • 29231: Inventor: Crash when importing Iventor file in Brep mode

    • 29194: ACIS reading improvements

    • 29190: Can’t open Solid Edge file

    • 29177: Pb with A3DAsmModelFileLoadFromFile

    • 29173: CAD file fails to import

    • 29164: Sewing improvements on Iges file

    • 29163: Sewing improvements

    • 29106: Cannot load xas file

    • 29099: STL model tree changes

    • 29098: ST9 Solid Edge MP5 Part file import not possible, parsing error

    • 29084: A3DGetFileFormat not correct output

    • 29082: Can’t open SolidWorks file

    • 29077: Iges Sewing

    • 29074: Hoops Part Viewer/Demo Viewer does not display anything in Graphics Area when opening a 3dxml file.

    • 29039: Reading in Tess mode is importing the BREP

    • 29022: no A3DMiscMarkupLinkedItem stored

    • 29015: Exchange is unable to read SAT data exported by itself

    • 28995: SLW Import issue 32 bits only

    • 28986: Can’t reread PRC generated with compressed BREP

    • 28946: Memory usage is too high

    • 28943: Export Step scaling issue, root PO transformation

    • 28889: Serialization issue can’t re read exported PRC

    • 28793: Cannot read STEP.Z files on linux32

    • 28756: Can’t load v26 sab files

    • 28750: SolidWorks nested subassemblies incorrect transformations

    • 28730: BreakPoint and Heap Corruption with the function A3DComputeFaceArea

    • 28701: Crash on ACIS export

    • 28668: Creo 4.0 reading improvements

    • 28634: IGES tessellation improvements

    • 28572: Can’t open CATDrawing

    • 28536: VRML reading improvements

    • 28461: ACIS reading improvements

    • 28369: Creo: Improve reader

    • 28345: Linux x86 reading issue with .stp.z files

    • 28231: NX file not read in HOOPS Exchange

    • 28225: Export step, step is missing a face

    • 28220: Creo: Reader improvement

    • 28171: IGES stability improvements

    • 28096: Not able to create the scs file of a x_t file

    • 28039: IGES stability improvements

    • 28033: Inventor stability improvements on Linux

    • 27987: Crashes when converting to PRC files that were exported to JT 9.5 with HOOPS Exchange

    • 27953: JT missing PMI link to solids

    • 27800: NX, AdaptAndReplace failure.

    • 27775: ACIS reading improvements

    • 27455: Can’t open ACIS file downgraded from ACIS 27 to 23

    • 27058: Missing character in a note

    • 26833: NX: A3DAdaptAndReplaceAllBrepInModelFile(Advanced): Missing faces

    • 26776: JT 10.2 Improvements

    • 26588: Scaling transformation has no effect

    • 26238: Copy&Adapt improvements

    • 25974: JT ULP improvments

    • 25095: -10007 error on a NX file

    • 24130: Reading of semantic PMI under Linux shows different results

    • 24121: ACIS reading improvements

    • 23252: missing surfaces

    • 20714: 3DXML; Wrong welding symbol

    • 19071: Default.stp to xt causes face loss

    • 19002: Elements not sewn as expected

    • 29582: Missing faces with a Step file imported in HPDV 2017_SP1

  • HE 2017 SP1 U2

    • 29101: Step Export problem

    • 29081: Solidworks assemblies initial view, User-defined views support

    • 29024: Cannot import Acis V23 SAb file

    • 28973: Can’t read assembly VRML on Linux

    • 28956: Can’t read Solid Edge file

    • 28932: Can’t read Solid Edge File

    • 28919: Regression: CV5-CV4 assembly missing parts

    • 28821: Missing component in 2017 SP1

    • 28810: Export STEP AP214: Scale issue

    • 28341: Acis to Parasolid conversion failed

    • 28238: ACIS export crash with JT file

    • 28229: Crash reading Solid Edge assembly

    • 28051: Can’t load a PRC file generated from a PDF file

    • 29144: missing nodes in Catia files

  • HE 2017 SP1 U1

    • 28840: Solidwprks parsing improvements

    • 28828: Copy&Adapt improvements

    • 28816: DLL Minor Version of 2017sp1 is 0

    • 28652: Can’t read stl file on Linux

    • 28614: N/A

    • 28314: Export STEP improvements

    • 27893: 3DXML - Item should be hidden

    • 27891: 3DXML - Missing colors

    • 27593: CV5 import empty

    • 28945: False importer version in A3DSDK.h

  • HE 2017 SP1

    • 28815: ProE reading improvements

    • 28808: SolidEdge Can’t load model file

    • 28795: Fail to read unicode on Linux

    • 28669: A3DTopoFaceGetShell is crashing with access violation

    • 28623: Accurrate Tesselation is wrong

    • 28577: Crash Export VRML

    • 28555: NX file does not open

    • 28509: incorrect Export step

    • 28492: Inventor reading improvements

    • 28463: Cannot load Step model

    • 28458: can’t open NX11 Data

    • 28457: Unable to read Creo file

    • 28452: Failed to open ASM file from Creo

    • 28421: SLW to STEP improvements

    • 28385: Exported STEP file size improvements

    • 28358: Accurate tesselation issue.

    • 28352: Face colors in NX file randomly change on Linux

    • 28342: STEP reading

    • 28339: CV5/CV4 reading improvements

    • 28334: VRML or XML with non ascii characters file name wrong export name

    • 28333: Point Sets in NX file get randomly marked as visible on Linux

    • 28299: Unable to read attached NX 11 file

    • 28272: SolidEdge attributes are missing

    • 28264: Rhino reading improvements with Visual Studio 2015

    • 28237: Export ACIS improvements

    • 28226: Export Steps can’t be opened in SolidWorks

    • 28221: Poster: Default view poster is empty

    • 28198: Export STL with UseHeightInsteadOfRatio export empty files

    • 28186: Random behavior for NX files on Linux

    • 28185: Random behavior for NX files on Linux

    • 28175: SLW: Bad geometry for holes

    • 28174: Sewing improvements

    • 28118: SLW to STEP improvements

    • 28107: Improve Bridge_XT for Rhino files

    • 28106: Improve Bridge_XT for Rhino files

    • 28105: Improve Bridge_XT for Iges files

    • 28104: Improve Bridge_XT for Rhino files

    • 28103: Improve Bridge_XT for Rhino files

    • 28102: Parasolid healing improvements

    • 28094: Sldprt export to STEP, the step file is scaled up by 25.4. Not able to worlk around

    • 28087: Error when importing SolidEdge file

    • 28084: SolidWorks Linux performance

    • 28074: STEP export crash

    • 28072: Crash when loading attached JT

    • 28065: U3D color improvements

    • 28042: Can’t load Rhino file with external references on Linux

    • 28037: NX11 reading improvements

    • 27974: Improve Bridge_XT for Creo files

    • 27965: Loading this step leads to empty scene

    • 27950: Missing faces when reading Step file

    • 27890: incorrect geometry in STEP file

    • 27820: JT PMI in wrong position

    • 27790: Rhino support for block occurrence

    • 27780: PRC result from A3DCompare not readable

    • 27605: ACIS export improvements

    • 27441: PDF file fails to open

    • 27439: A3DAsmProductOccurrenceGetIdentifier doesn’t return the same value from CAD file and From PRC

    • 27348: Misplaced parts and instancing in Rhino file

    • 27230: Misplaced parts in Rhino file

    • 27087: wrong accurate tesselation for step file

    • 27086: Tessellation accurate improvements

    • 26881: Catia file’s taking a long time to load and leave with error Unknown Format

    • 26742: Performance issue for inventor file

    • 26428: 3DM Files Not Processing in Viewer

    • 26388: Improve Bridge_XT for CATIAV5 files

    • 26312: SolidEdge - Crash on multiple import with tessellation and activated construction & references

    • 26096: CV5 assembly reading improvements

    • 25102: Parasolid export improvements with STEP files

    • 24621: Rhino file reads in empty

    • 24277: Parasolid export issue

    • 24080: A3DMiscUTF16ToUTF8 fails to convert umlauts

    • 23300: Wire frames in JT

    • 22280: Rhino reading improvements

    • 22227: Rhino file artefacts

    • 22203: STEP reading improvements

    • 21431: STEP reading improvements

    • 21369: rendering

    • 20385: Wrong display of tolerance value

    • 20264: issues with CURVE_BOUNDED_SURFACE

    • 19696: Rhino reading improvements

    • 19336: STEP AP242: PMI semantic not converted

    • 28855: Customer can’t create file.

  • HE 2017 U3

    • 28154: Error reading ipt file in Tess Only Mode. Regression from 2016SP2

    • 28150: Export PRC crashes on HED 2017

    • 28169: Missing Attributes on IFC Read

  • HE 2017 U2

    • 28223: Missing VRML colors

    • 28124: IGES reading improvements with Visual Studio 2015

    • 28116: Error loading JT-BREP

    • 28027: Export Acis is crashing

    • 28025: 2017 Behavior change in PRO export to Acis

    • 27799: Can’t access geometry in JT file

    • 27768: Support Summary: Getting hatching pattern data will generate allocation error on Windows, segfault on Linux

    • 27764: HOOPS Demo Viewer physical property are given in the wrong unit.

    • 28234: ACIS export improvements

  • HE 2017 U1

    • 27924: N/A

  • HE 2017

    • 28276: Wrong tesselation

    • 28038: Parasolid reading stability improvements

    • 27997: N/A

    • 27915: Parasolid bridge Rhino regression

    • 27897: NX: Bad posters for some files

    • 27855: SW, Missing part file in BREP mode

    • 27850: NX stability improvements

    • 27844: Creo file conversion fail

    • 27818: SolidWorks assembly not up to date

    • 27810: Can’t import entire SolidWorks assembly

    • 27756: N/A

    • 27741: JT imported as tess

    • 27726: Crash with Translate to PK Part

    • 27683: STEP writer improvements

    • 27681: Import concatenated Acis File

    • 27647: HPDV crash

    • 27638: SLW: Cannot read file

    • 27636: ACIS reading improvements

    • 27635: Parasolid healing stability improvements

    • 27623: N/A

    • 27622: N/A

    • 27519: STEP reading improvements

    • 27511: API fails to import PDF

    • 27488: STL Wrong computation of center of gravity.

    • 27478: Acis : Reading issue

    • 27385: Name of A3DAsmPartDefinitionData isn’t exported to step

    • 27384: initial position of part is wrong when exporting to step

    • 27376: Linux name encoding.

    • 27349: Not able to open sat file

    • 27308: missing parts reading step

    • 27286: KPE mode stability improvements

    • 27217: Solid Edge reading improvements

    • 27195: CATIAV5: Performance drop during A3DAdaptAndReplaceAllBrepInModelFile(Advanced)

    • 27168: Adapt&Replace improvements

    • 27158: SolidWorks reading improvements

    • 27139: Failed to open IGS file using HoopsExchange (file specific)

    • 27134: No distinction between hidden and removed state

    • 27127: Parasolid export improvements

    • 27033: Infinite planes in surfaces

    • 27011: Step positionning

    • 27001: Step surfaces wrong color

    • 26990: Visitors issue

    • 26893: Solidworks: Missing cube

    • 26863: Break with A3DDllSetCallbacksProgress: PRC

    • 26811: getting unexpected point projection results with new Hex block model

    • 26807: Feature request for Creo Layers

    • 26633: Exchange tessellation for CAD model appears incorrect

    • 26601: Solid Edge assembly file parsing issue

    • 26505: Solid Edge ST9 support

    • 26131: NX: Unable to read data

    • 25992: ACIS color improvements

    • 25802: N/A

    • 25709: N/A

    • 25472: 2+GB IGES files support

    • 25377: N/A

    • 25103: ACIS reading improvements

    • 24749: TfStrongAssert when exporting part of Inventor Assembly

    • 24703: Tessellation improvements

    • 24463: Missing references

    • 24242: step file crashes viewer.exe & appears incomplete in Hoops Exchange Demo

    • 23434: IGES export improvements

    • 23417: CV5 fillet conversion improvements

    • 23256: Inventor geometry error

    • 21476: PRC deserialization fix

    • 20066: IGES reading improvements

    • 28972: Can’t read Creo file

  • HE 2016 SP2 U3

    • 27587: SolidWorks face name cleanup

    • 27513: Hide Parts in HLR Mode using Views. Crash when computing HLR

    • 27497: HLR stability improvements

    • 28552: N/A

    • 27388: Catia File can’t be open

    • 27375: Creo part can’t be loaded

    • 27359: Can’t load NX assembly NX

    • 27331: HLR stability improvements

    • 27412: Can’t open Catia assembly

    • 27242: Stability improvements

    • 28316: A3DAsmModelFileExportToPrcStream return A3D_INVALID_ENTITY_NULL

  • HE 2016 SP2

    • 27232: Inventor Model Colored Incorrectly

    • 27133: ACIS export improvements

    • 27132: ACIS export improvements

    • 27131: ACIS export improvements

    • 27125: ACIS export improvements

    • 27103: ACIS export unit improvements

    • 27074: N/A

    • 27059: N/A

    • 27057: CV5 view improvements

    • 27056: CV5 view improvements

    • 27017: Inventor reading improvements

    • 27008: CV5 view improvements

    • 27003: STEP writer improvements

    • 26986: Infinite Loop reading NX file

    • 26958: Inventor geometry error

    • 26935: STEP orientation healing improvements

    • 26933: Encoding of Chinese characters

    • 26929: A3DSurfBaseGetAsNurbs takes too long

    • 26918: Wrong node names on STEP Export

    • 26895: Wrong interpretation of korean directory names

    • 26894: Wrong behavior with non unicode string

    • 26871: Sewing improvements

    • 26834: N/A

    • 26825: Parsing error for Solid Edge ST8

    • 26798: Tessellation improvements

    • 26784: CV5 reading improvements

    • 26760: CV5 parsing improvements

    • 26713: Missing uv trim curves for some faces

    • 26703: SAT file cannot be load using library, but demo app opens it

    • 26628: Reader SAT Single-entity files explode into multiple entities

    • 26580: Single-entity files explode into multiple entities when translated to X_T

    • 26579: -10007 error when importing sat file

    • 26574: Copy and Adapt improvements

    • 26561: PMI has wrong orientation

    • 26536: Performance issue when loading big PRC files

    • 26529: Parasolid export improvements

    • 26360: N/A

    • 26353: Inventor reading improvements

    • 26335: STEP orientation healing improvements

    • 26222: ACIS reading improvements

    • 26186: NX Datum has no references

    • 26147: Parasolid export improvements

    • 26086: N/A

    • 25818: Sewing improvements

    • 25801: U3D reading improvements

    • 25730: Case sensitivity in Catia assembly (linux)

    • 25723: CV5 drawing improvements

    • 25680: Inventor: API A3DCurveLength hang

    • 25510: N/A

    • 25430: Can not extract 3d stream from pdf file

    • 25340: transparency is broken when reading this pdf in HED

    • 25317: Parasolid evaluation improvements

    • 25220: N/A

    • 24988: N/A

    • 24817: Missing leader for Driven Dimensions

    • 24548: ACIS export issues

    • 24336: N/A

    • 24208: SLW: Views are duplicated

    • 24132: Datum should be hidden in views

    • 24010: Corrupted 3DXML

    • 23601: N/A

    • 23032: Creo reading improvements

    • 23007: IGES export performance improvements

    • 22786: A3D_DEFAULT_COLOR_INDEX as Color in A3DTessMarkupData

    • 20610: Different results in Sewing on Linux

    • 19898: U3D file format not recognized

    • 19389: N/A

    • 19331: New validation props settings in 3DR

    • 16344: step file displays incorrectly

    • 13366: STEP reading improvements

    • 27397: Catia CGR file are long to open

  • HE 2016 SP1 U6

    • 26797: Creo reading improvements

    • 26694: Inventor Geometry reading error

    • 26460: CV5 loading improvements

    • 26027: SolidWorks configurations improvements

    • 24672: Cannot delete prototype with A3DAsmProductOccurrenceEdit

    • 26810: CV5-6 R2016 support

  • HE 2016 SP1 U5

    • 26822: Adapt&Replace improvements

    • 26325: Adapt&Replace improvements

    • 26835: Sewing improvements

  • HE 2016 SP1 U4

    • 26375: Sewing stability improvements

    • 26346: Sewing stability improvements

    • 26743: STEP: Crash during sewing

  • HE 2016 SP1 U3

    • 26754: 3DXML: Misplaced parts

    • 26670: Crash computing planar section on model file with Exchange - started with Exchange 2016 SP1

    • 26587: Missing uv trim curves for some faces

    • 26582: A3DExport not identifying

    • 26577: 3DXML import empty

    • 26499: CV5 reading improvements

    • 26442: 3DXML reading improvements

    • 26379: CV5 parsing improvements

    • 26365: A3DFaceUVPointInside improvements

    • 26296: NX parsing improvements

    • 26276: CV5 PMI improvements

    • 26108: N/A

    • 26105: Catia V5 - 64-Bit & Brep - incorrect colors

    • 26014: ProE: Wrong tolerance limits for angle checks

    • 25969: NX: PMI - Missing references, modifier and undetected composite datum in one file

    • 25954: Tiff is recognized as 3ds

    • 25947: 3DXML reading improvements

    • 25884: A3DGetFileFormat performance improvements

    • 25866: CV5 parsing improvements

    • 25580: N/A

    • 25444: 3DXML reading improvements

    • 25300: BREP cant be loaded from Catia file CH

    • 26779: N/A

  • HE 2016 SP1 U2

    • 26542: A3DCompareFacesInBrepModels get stuck for Tolerance between 1 and 1.5

    • 26521: Exported Step file is incompatible with Solidworks

    • 26413: CGR parsing improvements

    • 26345: Dependencies not listed for Creo

    • 25509: Improve A3DAdaptAndReplaceAllBrepInModelFile

    • 26583: missing HEPB in Linux

  • HE 2016 SP1

    • 26297: Density issue

    • 26239: CV5 reading improvements with PMI

    • 26234: Parasolid export improvements

    • 26211: Bad Brep on SAT export

    • 26165: Creo blends ConvToNURBS improvements

    • 26157: N/A

    • 26146: bug fix

    • 26133: Parasolid export improvements

    • 26130: m_bFitAllToUpdateViewCameras not working properly

    • 26091: ACIS 25 and 26 support

    • 26074: NX: Slow load

    • 26071: SLW: Wrong display of weld symbols

    • 26065: Creo parsing improvements

    • 26064: IFC: Missing colors

    • 26049: N/A

    • 26048: DLL info addition

    • 26045: ProE: Arrow issues

    • 26023: Creo : Balloon leader attachment issue

    • 26022: ProE: Missing arrow

    • 26021: Creo : leader line misplaced

    • 26012: SolidWorks body name improvements

    • 26007: Issue fixed in 2016_U2

    • 25942: Export Iges issue

    • 25935: IGES: Solid only imported with hidden elements enabled

    • 25921: IFC: Cannot load file properly

    • 25911: IFC: Missing color

    • 25909: Cannot load huuuge CatProduct file with sample Viewer

    • 25897: SLW: Cannot load file with Variable Patterns

    • 25888: IFC: Boolean operations

    • 25853: Regression

    • 25850: SLW: Cannot load files

    • 25849: SLW: Cannot load file

    • 25841: ReadHiddenObjects=false doesn’t work on this NX file

    • 25838: NX: Missing parts

    • 25810: STEP writer improvements

    • 25806: IGES: Wrong patch/trimming curve

    • 25803: JT reading improvements

    • 25788: ProE: PMI Radius dimension Wrong Arrow Direction

    • 25766: STEP writer improvements

    • 25706: Incremental load improvements

    • 25698: CV5 reading improvements

    • 25677: Visitor stability improvements

    • 25561: IFC reading improvements

    • 25544: SolidEdge Sheet metal visibility when ReadConstruction&Ref=true

    • 25526: ProE: Wrong tolerance value display

    • 25525: ProE: Roughness should be displayed in views

    • 25524: ProE: Leaderline too long for balloon

    • 25523: ProE: Misplaced datum

    • 25480: ACIS export improvements

    • 25416: Incremental load improvements

    • 25405: Incremental load has been updated

    • 25393: incremental load

    • 25385: ReadAttributes setting is not working

    • 25237: NX: Bad views

    • 25187: JT - Transformation issue

    • 25065: CV5 reading improvements

    • 24963: Missing spatial modifiers for position tolerances

    • 24913: Copy and Adapt improvements

    • 24881: SolidEdge Alternative Assemblies

    • 24747: ProE: Cables are too thick

    • 24500: NX mold assembly is missing parts in latest Exchange versions

    • 24318: STEP writer improvements

    • 24285: conversion speed

    • 24228: STEP writer improvements

    • 23969: bugfix

    • 21992: STEP writer improvements

    • 21540: Leaderline too long for balloon

    • 21536: Two arrows instead of one for radius dimensions

    • 21470: Pro/E part file cannot be opened

    • 21217: Custom Color not saved in STEP/IGES

    • 21140: Misplaced screen note

    • 20259: wrong PMI filtering

    • 19817: Misplaced screen note

    • 19809: STEP writer improvements

    • 16783: STEP writer improvements

    • 16492: Transparency issue on Solidworks

    • 26416: NX parsing improvements

  • HE 2016

    • 25840: integration issue

    • 25662: SE Persistent ID

    • 25661: Inventor Persistent ID

    • 25660: Parasolid export improvements

    • 25653: ACIS reading improvements

    • 25641: NX: Dimension leaders without any point

    • 25640: Missing datum ref

    • 25623: API fix for UTF-8 support

    • 25605: CV5 density retrieval improvements

    • 25550: bug fix

    • 25540: CV5 reading improvements

    • 25533: NX reading improvements

    • 25528: ProE: Arrow should be outward instead of inward

    • 25527: ProE: Missing stub for driven dimensions

    • 25494: ACIS reading improvements

    • 25490: Inventor reading improvements

    • 25479: ACIS reading improvements

    • 25453: SolidWorks placement improvements

    • 25447: Creo views improvements

    • 25417: SolidWorks incremental load improvements

    • 25413: Can´t open NX10 Assembly

    • 25410: Solid Edge reading improvements

    • 25402: Parasolid export issue

    • 25375: NX reading improvements

    • 25371: A3DGetFileFormat PDF issue

    • 25351: ProE PMI Negative Dim values

    • 25347: A3DGetFileFormat UTF-8 issue

    • 25338: A3DCrvTransformGet API improvements

    • 25318: SLW: Non-default configurations loaded will be flagged as

    • 25309: API fix for UTF-8 support

    • 25308: ifc-Format: No Colour in HOOPS DemoViewer

    • 25305: Creo PMI improvements

    • 25303: ACIS reading improvements

    • 25302: ACIS reading improvements

    • 25301: CV5: Composite datum not detected

    • 25298: Inventor B-rep improvements

    • 25297: Inventor B-rep improvements

    • 25296: Inventor Brep improvement

    • 25295: ACIS reading improvements

    • 25294: ACIS reading improvements

    • 25293: ACIS reading improvements

    • 25291: NX: Missing references

    • 25286: N/A

    • 25277: N/A

    • 25263: NX: Crash in 64bit

    • 25261: Solid Edge parsing improvement

    • 25257: NX reading memory improvements

    • 25246: Creo incremental load improvements

    • 25235: NX reading improvements

    • 25230: Copy and Adapt improvements

    • 25213: JT: Missing density

    • 25212: Soliddge: wrong density volume unit

    • 25211: Package improvement

    • 25209: JT: Cannot load model

    • 25205: Shattered ProE: Model is hidden in views

    • 25203: Wrong color in shattered mode

    • 25201: vc110 stability improvements

    • 25189: ACIS reading improvements

    • 25185: NX parsing

    • 25178: CATDrawing - Drop out polyline partly

    • 25170: ACIS reading improvements

    • 25168: NX reading improvements

    • 25161: API fix for UTF-8 support

    • 25137: Simplify APIs orientation improvements

    • 25134: Transformations are wrong when importing with TessOnly

    • 25120: SolidWorks memory improvements

    • 25119: Creo memory improvements

    • 25115: SolidWorks configurations improvements

    • 25101: Creo parsing improvements

    • 25093: PMI are not loaded

    • 25078: SolidWorks incremental load improvements

    • 25064: NX reading improvements

    • 25058: ACIS reading improvements

    • 25057: ACIS reading improvements

    • 25054: Copy and Adapt improvements

    • 25053: STEP reading improvements

    • 25052: Copy and Adapt improvements

    • 25051: Copy and Adapt improvements

    • 25050: Copy and Adapt improvements

    • 25034: Copy and Adapt improvements

    • 25033: SolidWorks incremental load improvements

    • 25030: ACIS reading improvements

    • 25005: Mass properties

    • 24994: API fix for UTF-8 support

    • 24982: API fix for UTF-8 support

    • 24978: ACIS reading improvements

    • 24976: case insensitivity on Linux

    • 24974: Missing enum for datum target symbols

    • 24973: JT color improvements

    • 24962: Tessellation improvements

    • 24961: Symbolic threads are misplaced while showing NX file.

    • 24955: Solid Edge parsing improvement

    • 24949: CV5 reading improvements

    • 24946: Copy and Adapt improvements

    • 24942: SolidWorks incremental load improvements

    • 24935: PMI: CATIAv5: missing tolerance and datum modifiers

    • 24931: SolidWorks incremental load improvements

    • 24925: PMI: ProE: Wrong tolerance zone type for the second tolerance row

    • 24922: NX: No leader information for dimensions available

    • 24916: A3DMarkupDimensionData.m_eSymbol is always returning 0

    • 24912: PMI:NX: Wrong tolerance information for multiple tolerance rows

    • 24910: placement issue

    • 24905: API fix for UTF-8 support

    • 24904: PMI: CATIAv5: Wrong tolerance zone type

    • 24889: SolidWorks incremental load improvements

    • 24888: SolidWorks incremental load improvements

    • 24884: Solidworks views wrongly scaled

    • 24880: Incremental load improvements

    • 24873: NX incremental load improvements

    • 24857: API fix for UTF-8 support

    • 24855: A3DGetFileFormat fails with extension .PDF in uppercase

    • 24830: Cannot get lines data of IFC file

    • 24786: Incremental load not working with Pro/E assembly

    • 24775: Only wire is displayed in shattered mode

    • 24724: RootDirRecursive setting

    • 24690: STEP reading improvements

    • 24683: STEP, COMPONENTS TRANSFORMATION, LARGE SCALE

    • 24671: parsing issue

    • 24668: ACIS export improvements

    • 24657: N/A

    • 24608: Step PMI display

    • 24565: ACIS reading improvements

    • 24553: wrong colors

    • 24538: Parasolid export issue

    • 24524: Inventor B-rep support

    • 24519: A3DProjectPointCloud error with STEP file

    • 24501: CV5 incremental load improvements

    • 24468: Blank Inventor 2015 parts in Brep Mode, ok in Tess Mode

    • 24412: Creo reading improvements

    • 24375: body name issue

    • 24293: STEP reading improvements

    • 24185: Inventor reading improvements

    • 24154: bug fix

    • 24102: ACIS reading improvements

    • 24040: Copy and Adapt improvements

    • 24021: PRC deserialization fix

    • 24004: Creo reading improvements

    • 23999: NX reading improvements

    • 23944: Copy and Adapt improvements

    • 23624: ComputeUV bug

    • 23513: Export STEP: Cannot read back step file in NX or SLW + splitted surfaces

    • 23467: STEP reading improvements

    • 23347: Wrong cross-highlight

    • 23131: PMI scale

    • 23035: SolidWorks transparency improvements

    • 22486: Parasolid export improvements

    • 22250: Inventor reading improvements

    • 22191: STEP parsing improvements

    • 22067: Creo memory improvements

    • 21656: ProE: Misplaced note

    • 21546: Datum should be hidden in view

    • 21363: memory issue

    • 20607: PDF files cannot be read correctly in 3DR

    • 20582: ACIS reading improvements

    • 20529: wrong filtering in views for parts

    • 20400: Parasolid reader improvements

    • 18859: Tessellation improvements

    • 16489: SolidWorks reading improvements

    • 15086: Memory issue with PRC compression

    • 25940: Conversion issue has been fixed in Creo reader

  • HE 2015 SP2 U2

    • 24120: ProE colors

    • 23538: bug fix

    • 24837: ProE Part transformation

  • HE 2015 SP2 U1

    • 24859: CV5 loading improvement

    • 24842: Inventor Linux Missing resources

    • 24801: U3D Material shininess greater than 1

    • 24799: Inventor Brep

    • 24728: Cross section

    • 24661: Inventor Duplicated bodies

    • 24503: bug fix

    • 24883: Solid Edge parsing improvement

  • HE 2015 SP2

    • 25127: Solid Edge color improvement

    • 25017: Creo parsing improvements

    • 24809: Custom symbol not display correctly

    • 24768: A3D_LOAD_CANNOT_LOAD_MODEL for a CV5 file

    • 24756: parsing issue

    • 24755: parsing issue

    • 24754: parsing issue

    • 24745: parsing issue

    • 24744: can’t find hepb.dll

    • 24725: empty configuration

    • 24716: SolidWorks: Surface visibility

    • 24696: parsing issue

    • 24682: Creo crash

    • 24658: parsing issue

    • 24656: Interrupted leaderline

    • 24654: Wrong anchor point for FCF

    • 24653: Ordinate origin should be hidden in view

    • 24652: Note shouldn’t be filtered in view

    • 24651: Misplaced note

    • 24650: No symbol for stub

    • 24649: PMI should be displayed in view

    • 24627: NIST: Datum shouldn’t be displayed in view

    • 24604: parsing issue

    • 24591: Fail to load Creo file

    • 24575: parsing issue

    • 24561: Exchange isn’t using the substitution font for tolerance text

    • 24554: bug fix

    • 24551: Creo parsing improvements

    • 24549: parsing issue

    • 24534: visibility issue in view

    • 24533: visibility issue in view

    • 24529: wrong color

    • 24513: SolidWorks part, Body Visibility

    • 24510: missing attributes

    • 24489: bug fix

    • 24470: PDF parsing issue

    • 24467: SE Incorrect part visibility

    • 24466: SE wrong display of assembly feature

    • 24458: bug fix

    • 24447: bad geometry

    • 24440: scale issue

    • 24439: parsing issue

    • 24437: Korean characters in attribute names

    • 24423: parsing issue

    • 24418: PMI font on linux

    • 24417: parsing issue

    • 24415: bug fix

    • 24413: Wrong size for text

    • 24404: infinite loop

    • 24383: Missing leaderline for datum A

    • 24362: crash

    • 24349: missing comma in header

    • 24345: A3DProjectPointCloud2 or A3DProjectPointCloud A3DBool bUseExactComputation seems to have no effect. tessellated data

    • 24344: exception raised: Point Cloud Projection using tessellated data

    • 24335: Cannot load file when RedPMI=true

    • 24326: bug fix

    • 24307: N/A

    • 24268: missing bodies

    • 24261: tessellation issue

    • 24259: body name issue

    • 24237: loop orientation issue

    • 24235: loop orientation issue

    • 24219: 3D curves vs. UV curves

    • 24205: Parasolid reader issue

    • 24192: support for Catia V5 r24 latest service packs & hotfixes

    • 24176: parsing issue

    • 24159: NX: Unnecessary parts are shown

    • 24150: Flippable annotations

    • 24148: Text Variable is not converted

    • 24147: NX: Color of the bracket is invalid

    • 24127: Model should be hidden in view

    • 24126: JT: Missing linked item

    • 24113: Wrong view names under Linux for JT parts

    • 24100: density support

    • 24097: Attached NX file is failed to open in Hoops viewer

    • 24094: Parasolid reader issue

    • 24076: The tolerance values are correct in HOOPS release 710.

    • 24073: Incorrect density

    • 24068: Cannot load model when FitAllToUpdateViewCameras=”true”

    • 24062: parsing issues

    • 24052: infinite loop

    • 24051: parsing issue

    • 24043: Missing text

    • 23932: memory leak

    • 23910: Missing PMI in the sample Viewer in release x64 mode

    • 23906: Cannot load config directly in HOOPS Exchange Demo

    • 23888: inconsistent display of catpart within Viewer & Hoops Exchange Demo

    • 23886: Incorrect and missing Catia dimensions

    • 23875: PDF parsing issue

    • 23854: Read hidden object option is not taken into account for NX

    • 23722: MASS properties incorrect

    • 23720: bug fix

    • 23634: infinite loop

    • 23511: bug fix

    • 23425: crash

    • 23234: Hang loading JT file in Exchange Publish 2015 - Linux

    • 22648: Wrong camera

    • 22644: link between pmi and geometry

    • 22495: crash

    • 22339: parsing issue

    • 21817: Datum Target terminating with X are not managed

    • 21562: Wrong link between annotation and geometry

    • 21512: Datum A, B, C should not be displayed

    • 21503: annotation is lost in space

    • 21239: Cannot display SolidWorks file contents

    • 21214: Misplaed driven dimension

    • 21173: Misplaced symbol in table

    • 21147: Leader too short for datum

    • 21119: Missing stub

    • 21108: XXX characters in empty note

    • 21097: Empty notes with XXXXXX

    • 21083: leaderline interruption

    • 19918: A3DPDFMakeSnapshotFromModelFile produces wrong images from views

    • 19912: pmi bug

    • 19826: Incorrect PMI placement

    • 16883: Missing parts

    • 15016: tessellation issue

    • 26265: Better Creo reading stability

  • HE 2015 SP1 U2

    • 23818: broken search paths

    • 23777: sw missing file occurences or file paths

    • 23613: bug fix

    • 24195: PDF parsing issue

  • HE 2015 SP1 U1

    • 23916: bug fix

    • 23794: bug fix

    • 23723: SW samples from DS site give wrong mass properties

    • 23707: parsing issue

    • 23546: N/A

    • 23961: bug fix

  • HE 2015 SP1

    • 24155: Characters in the table should be centered rather than aligned left

    • 24031: bug fix

    • 23923: parsing issues

    • 23919: parsing issues

    • 23917: ComputePhysicalProperties return wrong value

    • 23892: bug fix

    • 23864: Crash in sample viewer

    • 23855: missing faces

    • 23826: crash

    • 23824: parsing issues

    • 23813: parsing issue

    • 23793: A3DSurfBaseGetAsNurbs return codes

    • 23779: bug fix

    • 23778: inventor file crash exchange on linux

    • 23757: crash

    • 23702: parsing issues

    • 23689: parsing issue

    • 23681: crash

    • 23678: crash

    • 23675: visibility issue

    • 23670: STL export issue

    • 23662: crash

    • 23660: issue with IFCPRODUCTDEFINITIONSHAPE

    • 23630: crash

    • 23620: parsing issue

    • 23607: parsing issues

    • 23603: parsing crash

    • 23578: Wrong visibility in views

    • 23576: parsing issue

    • 23561: CATProduct cannot be opened by 8.0 used to work in 7.2

    • 23547: parsing issue

    • 23536: name attribute support for CV5R24

    • 23523: crash

    • 23510: Can’t load IFC files with comments in the header

    • 23509: crash

    • 23504: parsing issue

    • 23488: Cannot load slw file

    • 23487: cannot load slw files

    • 23470: parsing issue

    • 23468: parsing issues

    • 23450: Cannot load SLW files

    • 23449: Cannot load NX file

    • 23431: crash

    • 23423: Crash when loading jt-ulp file

    • 23419: missing B-rep

    • 23414: Regresison: Missing texture

    • 23406: parsing issue

    • 23403: No texture in Brep mode when drag and dropping the file in HOOPS Demo 2015 U1

    • 23398: missing B-rep

    • 23387: parsing issue

    • 23379: Solidworks asm loading failure on Linux

    • 23374: cannot load file anymore

    • 23355: Empty file

    • 23321: markup with no tessellation

    • 23264: missing font loading

    • 23251: visibility issue

    • 23120: parsing issue

    • 23118: bug fix

    • 23109: crash

    • 22924: Inconsistent progress callback during STEP export

    • 22872: parsing issue

    • 22798: parsing issues

    • 22709: JT crash

    • 22344: Creo: missing parts on scene

    • 22198: Missing line under dimension

    • 22163: Wrong link between annotation and geometry

    • 21902: Wrong reference on multi-part-faces

    • 21852: Cannot load a CATPart model file

    • 21660: Wrong stub orientation

    • 21555: Wrong alignement between dimension and FCF

    • 21554: Bad extension line for driven dimensions (radius dim)

    • 21530: leaderline too long for driven dimension of radius

    • 21510: Missing leader

    • 21507: No Unit and Type for angle dimensions

    • 21506: Bad leader for angular dimension

    • 21180: missing surfaces in Parasolid export

    • 21172: Misoriented note

    • 21145: Wrong ordinate dimensions

    • 21142: Misaligned dimensions

    • 20530: compound body issue

    • 20203: sewing issue

    • 19905: A piece of a Surface finish annotation is misplaced

    • 18237: bug fix

    • 17568: consistency issues

    • 17124: Section body shouldn’t be displayed by default

    • 17083: Misplaced ordinate dimensions

    • 24402: bad views

  • HE 2015 U1

    • 23424: consistency issues

    • 23385: bug fix

    • 23352: performance issues

    • 23338: crash

    • 23309: performance issues

    • 23308: missing data with ReadHidden flag

    • 23288: reader issue

    • 23274: API issue

    • 23236: bug fix

    • 23235: parsing issues

    • 23232: ProductLoadStatus issue

    • 23228: Cannot load Inventor files

    • 23207: memory leaks

    • 23199: missing data with ReadHidden flag

    • 23176: parsing failure

    • 23147: parsing failure

    • 23143: parsing failure

    • 23124: parsing failure

    • 23100: undefined symbols

    • 22991: visitor issue

    • 22975: parsing issues

    • 22965: SLASM incomplete if ReadHiddenObjects is false

    • 22906: Failed to open the NX assembly

    • 22785: TfStrongAssertFailed because of empty MkpAnnotationItem

    • 22721: No highlight

    • 22656: performance issues

    • 22591: crash

    • 22478: CV piping

    • 22435: consistency issues

    • 22378: parsing issue

    • 22116: crash

    • 21901: Parasolid writer issue

    • 21629: consistency issues

    • 21558: Note should be written in two lines instead of three

    • 21529: Wrong aligment of driven dimensions compare to their leaderline

    • 21513: Hidden PMI in views

    • 21485: No space before and after FCF values

    • 21330: CV5 parsing improvements

    • 21141: Misplaced FCF

    • 21090: Misplaced dimension

    • 21089: Misplaced cumulated dimensions

    • 21087: Misplaced dimensions

    • 20393: support for mutiple connexes as one part in Parasolid export

    • 20335: placement issue and missing surfaces

    • 20328: missing surfaces

    • 20327: STEP orientation healing

    • 20286: STEP orientation healing

    • 20048: SmartHeap issues

    • 19900: Wrong camera in views

    • 19480: bad geometry

    • 19337: Missing body in NX 8.5 part

    • 18962: consistency issues

    • 18893: Parasolid writer issue

    • 18564: ug nx part names corrupted

    • 18135: Parasolid sewing fix +various improvements

    • 17998: consistency issues

    • 17953: consistency issues

    • 17931: IGES tolerance issue

    • 17609: consistency issues

    • 17140: issue with the accurate tessellation

    • 17088: STEP orientation healing

    • 16793: missing surface

    • 16618: Parasolid writer issue with face mode

    • 16597: consistency issues

    • 16490: Visibility issues on Solidworks files

    • 16400: SLW: Color bugs on several SolidWorks parts

    • 16373: consistency issues

    • 16036: consistency issues and conversion speed

    • 16014: manage A3D_LOAD_MISSING_COMPONENTS error in parasolid bridge

    • 15766: Extra visible parts

    • 15201: consistency issues

    • 14522: consistency issues

    • 24095: NX: Hatching lines are not converted

  • HE 2015

    • 22993: parsing issues

    • 22967: NX attributes

    • 22964: add ability to compute face edges on 3DTessData

    • 22962: PRc twice bigger with new reader

    • 22919: missing free calls

    • 22911: parsing issues

    • 22901: infinite loop

    • 22895: Cannot load CV5 file

    • 22894: Cannot load CATPart

    • 22828: consistency issues

    • 22813: No geometry

    • 22800: crash

    • 22799: parsing issue

    • 22781: parsing issue

    • 22770: crash

    • 22756: tessellation issue

    • 22737: Tessellation calculated with A3DRiRepresentationItemGetTessellation differs of the initially loaded tessellation

    • 22714: Parasolid export issues

    • 22700: parsing issues

    • 22685: PMI crash bug

    • 22684: consistency issues

    • 22673: Wrong leader for CATDrawing

    • 22672: parsing issues

    • 22664: Viewer sample improvements

    • 22616: tessellation issue

    • 22610: parsing issue

    • 22598: Viewer sample improvements

    • 22547: missing API checks

    • 22503: parsing improvements

    • 22494: Viewer sample improvements

    • 22453: Crash in Draw.cpp for VRML files

    • 22452: Cannot load Inventor file

    • 22434: Bad display of surface finish

    • 22432: Misplaced datum target

    • 22415: parsing failure

    • 22377: parsing issues

    • 22372: Missing stub for FCF

    • 22354: Parasolid export issues

    • 22336: export setting issue

    • 22331: Viewer sample improvements

    • 22300: infinite loop

    • 22273: placement issue

    • 22257: crash

    • 22242: parsing issues

    • 22239: parsing issues

    • 22219: parsing crash

    • 22161: copy and adapt bug

    • 22148: crash

    • 22140: crash

    • 22136: Error when calling A3DRootBaseGet on a drawing view

    • 22100: parsing failure

    • 21988: Some IFC files taking too much time to be read

    • 21987: parsing failure

    • 21985: parsing issues

    • 21976: Display of tolerances

    • 21942: parsing issue

    • 21935: placement issue

    • 21921: Missing PMI

    • 21919: Ug visibility issue

    • 21917: No link between annotations and geometry

    • 21890: parsing failure

    • 21858: missing attributes

    • 21856: CAD file is imported in STAR-CCM+ 6.04 but not 9.04

    • 21819: parsing issue

    • 21767: Wrong tolerance on geometric tolerancing area

    • 21673: No hatching for PMI region

    • 21634: parsing issues

    • 21601: Missing part

    • 21579: No link between annotations

    • 21578: No link between annotations and geometry

    • 21576: No links between annotations

    • 21571: Missing information in A3DMkpMarkupData for Datum

    • 21570: Bad display of annotations

    • 21569: Missing annotations

    • 21567: Support of views

    • 21560: Misplaced datum

    • 21547: Leader too short for datum

    • 21544: Misplaced datum

    • 21508: Bad geometry

    • 21488: No hatching for PMI regions

    • 21405: Surface visibility by default

    • 21380: Incorrect leader

    • 21212: wrong color for dimensions

    • 21207: parsing failure

    • 21165: Wrong leader for datum

    • 21155: Misplaced datum attached to dimension

    • 21149: Wrong line

    • 21148: Wrong arrow style

    • 21133: Misplaced datum with no leader

    • 21125: Datum text is misoriented

    • 21114: Misplaced 3d centerline

    • 21110: antislash after surface finish value

    • 21107: Missing arrows

    • 21103: hidden pmi should be shown

    • 21102: NX8: Missing leader on datum

    • 21094: parsing failure

    • 21084: Missing multiple leader for welding symbol

    • 21050: PDF parsing issue

    • 21040: tessellation issue Candidate for 7.2 Hot Fix

    • 21038: Can’t use Exchange in a separate library on Linux

    • 21028: parsing issues

    • 20963: exploded solid

    • 20962: crash and consistency issues

    • 20920: issues with self-intersecting curves

    • 20831: NX surface name issue

    • 20814: PMI shoudn’t be displayed

    • 20781: NX model tree issue

    • 20710: Wrong anchor point+missing stub

    • 20352: Parasolid export improvements

    • 20287: scale issue

    • 20071: SolidWorks SLDASM reading error

    • 20058: No link + No highlight

    • 19960: Missing linked items

    • 19785: No link between GT and dimension

    • 19543: Wrong color for parts

    • 18336: JT reading improvements

    • 18308: Transparency issue

    • 16483: Bad conversion of a SolidWorks assembly

    • 16071: consistency issues

    • 16021: issues with CURVE_BOUNDED_SURFACE

    • 15798: crash

    • 15768: part/ subassembly with instance are missing

    • 15767: Visibility issue

    • 15763: bad display of tessellated PMI

    • 15720: Tessellation bug

    • 15632: Cannot load SLW file

    • 14993: placement issue

    • 14204: Parasolid export issues

    • 23031: JT parsing