Copy and convert to NURBS parameter.
A3D_TRUE, surfaces will keep their parametrization when converted to NURBS.
Tolerance value of resulting B-rep.
The value is relative to the scale of the model.
A3D_TRUE, UV curves that cross seams of periodic surfaces are replaced by 3D curves.
A3D_TRUE, the faces with a periodic basis surface are split on parametric seams.
A3D_TRUE, the faces with a closed basis surface are split into faces at the parametric seam and mid-parameter.
A3D_TRUEand m_bForceComputeUV is set to
A3D_TRUE, computed UV curves can cross seams.
It will be automatically disabled if m_bSplitFaces or m_bSplitClosedFaces are set to
A list of acceptable surface types that your modeler can handle.
Acceptable surface types are listed in A3DSDKTypes.h and begin with ‘kA3DTypeSurf’
A list of acceptable curve types that your modeler can handle.
Acceptable curve types are listed in A3DSDKTypes.h and begin with ‘kA3DTypeCrv’
Continue processing even if an error occurs.
Use A3DCopyAndAdaptBrepModelAdvanced to get the error status.
A3D_FALSE, UV curves may stray outside the UV domain as long as the 3D edge tolerance is respected.
If set to
A3D_TRUE, the UV curves will be clamped to the UV domain (if the clamp still leaves them within the edge tolerance).
- A3DBool m_bUseSameParam